So how do I install my new EZ?

To be honest, I had planned on doing a long install paper with this article, and including a bunch of pictures etc.  I changed my mind.  This thing is so easy to install, that I felt it unnecessary to do so.  I'll give you the basics though.

When you receive the product in the mail, or via the carrier that your shipper chooses, you'll be surprised at how small the box is, and how simple it looks.  It's just a small black box that shows the Edge Products logo on the top, with a single harness that splits into two directions.  One connecter hooks into the data link plug, and the other goes into the MAP sensor.  My install took approximately 10 minutes.  Very simple and easy!  I was quite impressed.

My EZ installed Click picture to enlarge

I decided to put the velcro on my box first, and attach it to the top of the fuse box under the hood.  The fuse box is located on the drivers side of the vehicle, right behind the battery.  Make sure you clean the plastic cover of the fuse box before adding the velcro strips provided.  If you don't, the box can easily come off.  I recommend using a window cleaner first, then using an alcohol pad to get off all grease and oil.

From this point, all you have to do is read the instructions.  They're laid out well, and they're easy to follow.  If you do get confused, or can't find something, call Edge Products and ask them.  Remember how I talked about their customer service?  Well, I assure you that you'll be satisfied with their support if you need it.

You can get their contact information by going to their website, http://www.edgeproductsinc.com.  Click on the "contact us" link, and give 'em a call. 

For those who own 2001's with an automatic transmission, the wastegate is a solid line.  This means that you cannot install the brass elbow.  This should not adversely affect the operation of your truck, or the EZ.  You should have an EGT gauge installed.  Hey, didn't I say that before?

Click here for complete instructions

Click here for 2001 auto install instructions

So what's the final verdict?

DieselTruckResource.Com gives the Edge EZ a 9 out of 10.  Why the 9?  I didn't see all the power that the Edge Product's website shows, but I have to put some of the blame for that on me.  Like I stated before, I wasn't perfect on the dyno.  Not only that, I have an auto. I'm sure that the gains will be better for those of you who have a manual.

Installation of this box is VERY easy and you don't have to be a mechanic to take full advantage of this product.  You don't have any mechanical changes to make except for the elbow, and the Edge EZ is easily removeable.  Why is that a plus?  Always remember that you're your own warranty station! 

In closing...

If you're looking for something that can give you an increase in power without going overboard, this is the product for you.  It's amazing to me how simple it was, and I now have the towing power I want for those big hills, and the Powerstrokes at the light!

Good job Edge Products!  You have a Gem here!

Want to buy an Edge EZ?
Then click here



Jack Thorpe - Webmaster, DieselTruckResource.Com