The Ranch on the 25th
05-01-2009 | 03:34 PM
#121
I watch wind blow...
Joined: Dec 2006
Posts: 1,390
Likes: 0
From: Red Dirt territory of TEXAS
MAX I need you to send that video to me please. daniel.altman@mnd-b.army.mil if you would sir.
Matt dont blow this one up!
Matt dont blow this one up!
Matt building the motor up before it goes in??
05-01-2009 | 03:47 PM
#122
Registered User
Joined: Sep 2003
Posts: 2,534
Likes: 0
From: Plano, TX
So my parking brake light has been coming on lately even when the brake is off. Usually you can pull up on the pedal a bit and it would go out, but today it finally just wouldn't go off. So I got under there and pulled the switch out.
Here is what it looks like
The copper arm is cracked almost all the way across right at the 90* bend. Apparently, it's not strong enough to last through 200K miles of the brake arm slamming against it each time the brake is released.
Of course, no one stocks the part so I guess I'll be ordering.
At least it was simple, I was anticipating a chaffed wire somewhere that I was going to have to track down.
Here is what it looks like
The copper arm is cracked almost all the way across right at the 90* bend. Apparently, it's not strong enough to last through 200K miles of the brake arm slamming against it each time the brake is released.
Of course, no one stocks the part so I guess I'll be ordering.
At least it was simple, I was anticipating a chaffed wire somewhere that I was going to have to track down.
05-02-2009 | 11:38 AM
#123
Registered User
Joined: Jul 2002
Posts: 2,242
Likes: 16
From: Celina, TX
A really bad design. After playing with it a little bit, I realized how much pressure it takes to push the arm back to open the switch. Combine that with the hard it it takes when the brake is released, that's just asking for something on that switch to break.
05-02-2009 | 03:18 PM
#124
Banned
Joined: Mar 2007
Posts: 192
Likes: 0
From: Sacramento CA
05-02-2009 | 07:54 PM
#126
Registered User
Joined: Nov 2004
Posts: 5,680
Likes: 2
From: McKinney, TX
Looks like this weekend is gonna be a total washout. 
We need the rain.....so im not complaining. Would have been nice to get some yard work done today...and watch it rain all evening. But I guess we have had around 1-1.5 inches here in McKinney so far today.
100 percent chance of heavy rain tonight too.
..
We need the rain.....so im not complaining. Would have been nice to get some yard work done today...and watch it rain all evening. But I guess we have had around 1-1.5 inches here in McKinney so far today.
100 percent chance of heavy rain tonight too.
..
05-02-2009 | 08:22 PM
#127
I watch wind blow...
Joined: Dec 2006
Posts: 1,390
Likes: 0
From: Red Dirt territory of TEXAS
rain, rain, come today. . .
Looks like this weekend is gonna be a total washout.
We need the rain.....so im not complaining. Would have been nice to get some yard work done today...and watch it rain all evening. But I guess we have had around 1-1.5 inches here in McKinney so far today.
100 percent chance of heavy rain tonight too.
..
We need the rain.....so im not complaining. Would have been nice to get some yard work done today...and watch it rain all evening. But I guess we have had around 1-1.5 inches here in McKinney so far today.
100 percent chance of heavy rain tonight too.
..
We just had a storm blow through for about 15 min, maybe caught 2/10 of an inch. . . BUTTTT it was beautiful, had not seen rain in a LONG time.
05-02-2009 | 11:19 PM
#131
I watch wind blow...
Joined: Dec 2006
Posts: 1,390
Likes: 0
From: Red Dirt territory of TEXAS
Ill ask you fellars this, I am looking for a 5/8 x 5/8 x 5/8 barb brass T , for my AC mod, bypassing the heater core.
but I can't even find it on the "webbernet
" I have been able to find plastic/ nylon T's will they hold up to the heat and pressure??
ps. The dyno event at bully dog last year was fun for the brief time I was there. Heck my backside even made a magazine.
but I can't even find it on the "webbernet
" I have been able to find plastic/ nylon T's will they hold up to the heat and pressure??ps. The dyno event at bully dog last year was fun for the brief time I was there. Heck my backside even made a magazine.
05-02-2009 | 11:29 PM
#132
Registered User
Joined: Jul 2002
Posts: 2,242
Likes: 16
From: Celina, TX
Good luck with that...couldn't find any barb fittings, much less T's. I ended up using regular brass threaded valves and screwed the barb fittings into the ends. So the valves ended up much longer than I'd like.
05-02-2009 | 11:59 PM
#133
I watch wind blow...
Joined: Dec 2006
Posts: 1,390
Likes: 0
From: Red Dirt territory of TEXAS
YIKES
, not the answer I was hoping for reality stinksthis is what I have so far, and the group of fittings on the bottom of the pic is what the piece should look like that i need. .
05-03-2009 | 03:48 AM
#134
Registered User
Joined: Nov 2004
Posts: 5,680
Likes: 2
From: McKinney, TX
Yeah I figured we would probably do something for that event as a GTG. I am going to try to plan my trip to Grand Canyon so it doesn't interfere.
Should be a really fun event! Last year was great.
..
05-03-2009 | 06:36 PM
#135
Banned
Joined: Mar 2007
Posts: 192
Likes: 0
From: Sacramento CA
That event was awsome!! We all went to that and was a good turnout, so who all is goin to TS this weekend because Mike and I was going to see about getting ahold of a tranny jack and maybe a cherry picker for the swapping we will be doing on the truck