What did you do to your Gen 1 today?
#4771
Registered User
Well, I couldn’t get the bolt out of the belt tensioner last night, without fear of breaking the bolt with my 1/2” drive breaker bar. Soaked it in PB all night, pulled out a bent bolt this morning, raced over to the hardware store and grabbed a new 10x1.5x80 bolt grade 10.9. The little weewee on the tensioner was sheared off. The only thing that I can think of is that the PO must have somehow hit the tensioner, when he removed the AC compressor. It’s been fine for about 4,000 miles, but it was time I guess. Hopefully the Dayco tensioner with a COMPOSITE pulley will last. The old one had a steel pulley.
#4772
#4773
Registered User
Join Date: Dec 2010
Location: Land of the Toxic Avenger
Posts: 6,789
Received 1,647 Likes
on
1,120 Posts
Could this be related to how the lights get grounded? I remember J martin mentioning it in the past.
https://www.dieseltruckresource.com/...8/#post3281230
https://www.dieseltruckresource.com/...8/#post3281230
Might be the ticket. After reading that post, it seems as though I read it back then, and then completely forgot about it.
Appreciated.
#4774
Registered User
I started a full fluid change on my CTD RamCharger today since PA DOT decided to start spraying car rotting chemicals on the road. Dropped the tranny pan (518) and found a nice chunk of metal stuck to the magnet. I didn't see a lot of flakes in the fluid, but big chunk of mystery metal has me concerned. I haven't seen a slushbox worth owning and this one has performed well, but I'm guessing it is not long with this world. I'll start a new thread and hope someone can shed some light on what is broken.
#4775
Registered User
#4776
Registered User
I have been running those composite dayco pulleys on my tensioners for a lot of miles now with no issues. But having said that I have never had a steel one....so not sure what is the norm?
#4777
Registered User
I started a full fluid change on my CTD RamCharger today since PA DOT decided to start spraying car rotting chemicals on the road. Dropped the tranny pan (518) and found a nice chunk of metal stuck to the magnet. I didn't see a lot of flakes in the fluid, but big chunk of mystery metal has me concerned. I haven't seen a slushbox worth owning and this one has performed well, but I'm guessing it is not long with this world. I'll start a new thread and hope someone can shed some light on what is broken.
#4778
Registered User
Yesterday I took the Vanilla Gorilla [White '85 crew], The Gauntlet ['89 12V RC] and Poncho ['91.0 W250] off the road due to the fact the salt trucks started up yesterday for the few inches of snow we just got. Time to write up a small list of things to fix on each rig and leave them on the dash. I do this so I don't forget any of the things that need attention to be ready to rock next April or early May when the salt is washed off the roads. Time to clean out the back of the shop and tuck some Mopar away for a long winter.
#4779
Registered User
Yesterday I took the Vanilla Gorilla [White '85 crew], The Gauntlet ['89 12V RC] and Poncho ['91.0 W250] off the road due to the fact the salt trucks started up yesterday for the few inches of snow we just got. Time to write up a small list of things to fix on each rig and leave them on the dash. I do this so I don't forget any of the things that need attention to be ready to rock next April or early May when the salt is washed off the roads. Time to clean out the back of the shop and tuck some Mopar away for a long winter.
#4781
Registered User
Yesterday I took the Vanilla Gorilla [White '85 crew], The Gauntlet ['89 12V RC] and Poncho ['91.0 W250] off the road due to the fact the salt trucks started up yesterday for the few inches of snow we just got. Time to write up a small list of things to fix on each rig and leave them on the dash. I do this so I don't forget any of the things that need attention to be ready to rock next April or early May when the salt is washed off the roads. Time to clean out the back of the shop and tuck some Mopar away for a long winter.
#4782
Registered User
The Vancouver BC area I was originally from was the same way....just having to deal with the several million less then courteous and caring individuals on the road, and in the community is what killed it for me.
#4783
Registered User
I started a full fluid change on my CTD RamCharger today since PA DOT decided to start spraying car rotting chemicals on the road. Dropped the tranny pan (518) and found a nice chunk of metal stuck to the magnet. I didn't see a lot of flakes in the fluid, but big chunk of mystery metal has me concerned. I haven't seen a slushbox worth owning and this one has performed well, but I'm guessing it is not long with this world. I'll start a new thread and hope someone can shed some light on what is broken.
Unfortunately! What a bummer! The end that looks broken at an "angle" is most likely the good end, and the end that looks "square" is most likely the broken end.
#4784
Registered User
not to...but with and for.this was my '88 D100 that I had originally bought for $300 as a parts truck for the '87 D100 I got from my Uncle Jim, and his now my '91 W250. The '88 was too nice to part, and in better shape than the '87, and Jim wanted to find a cab from a diesel, so I drove the '88 for about 5 years, and swapped the 318/auto from the '87.When Jim passed and I got the diesel, I parked the '88 and didn't know what to do with it. A buddy's son needed wheels, so I sold it to him.Well he tore it apart and started to redo it when he quit his job and moved to Alabama. He was hurting for $$, so he had his Dad sell parts for cash. I got the cab,front clip, and tailgate back for $300. The cab is rust free, with just one bad spot on the roof. It was originally a V6 5 speed, so I thing the hump will be the same. But it will be yard art till Springtime.
and this is what I brought home, minus the 6 foot bed. The rear frame is shot, but he'll get the frame back since his boy rebuilt the front end.
and every wife's dream come true....and that is how wide our yard is, so they kinda stick out.
and this is what I brought home, minus the 6 foot bed. The rear frame is shot, but he'll get the frame back since his boy rebuilt the front end.
and every wife's dream come true....and that is how wide our yard is, so they kinda stick out.
The following 2 users liked this post by Blue Goose:
mknittle (11-11-2017),
thrashingcows (11-11-2017)
#4785
Registered User
That is the end of a snap-ring. One that probably holds a reaction plate in. Its been several years since I have been in a 518. That tranny will need some attention soon! Very simple part, that requires a complete tear-down to get to.
Unfortunately! What a bummer! The end that looks broken at an "angle" is most likely the good end, and the end that looks "square" is most likely the broken end.
Unfortunately! What a bummer! The end that looks broken at an "angle" is most likely the good end, and the end that looks "square" is most likely the broken end.
The only attention I will give to an auto is a quick toss in the scrap pile. I have a donor with a Getrag, that will be my cheapest option I'm thinking.