Your opinions please?
#1
Registered User
Thread Starter
Join Date: Oct 2004
Location: Colorado
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
Your opinions please?
So what is the best track bar fix? The 2 that I have seen are DT and Solid Steel, what are your guy's thoughts and opinions? Is there somethin else out there?
http://www.dtprofab.com/dodge.htm
http://www.solidsteel.biz/index.htm
http://www.dtprofab.com/dodge.htm
http://www.solidsteel.biz/index.htm
#2
I have the DT trac bar. I have put 10k on it and LOVE it.
The only bad part about the DT is you have to keep replacing the heim joint. I am ready for one right now.
Justin
The only bad part about the DT is you have to keep replacing the heim joint. I am ready for one right now.
Justin
#3
Registered User
Join Date: Jan 2003
Location: Used to be missoula, montana: Now in Sonoma County California
Posts: 1,198
Likes: 0
Received 2 Likes
on
2 Posts
this is why i have shy'd away from the trac bar fixes so far. they are great in some respects but as far as i am still concerned the jusy is still out on them.
My opinion is a full poly bushed unit with easily obrainable busings similar to the old F-350 panhard bar bushings would be my ticket especially with the miles i put on. im not sold on hiems ect in a high road mileage application
My opinion is a full poly bushed unit with easily obrainable busings similar to the old F-350 panhard bar bushings would be my ticket especially with the miles i put on. im not sold on hiems ect in a high road mileage application
#4
Chapter President
I have high mileage Lukeslinks with 0 play or problems.....the simplest, robust and most cost-effective way to end track bar problems, IMO....
Thread
Thread Starter
Forum
Replies
Last Post
Varmint
2nd Gen. Dodge Ram - No Drivetrain
6
03-13-2010 09:04 AM
Wcsting
3rd Gen High Performance and Accessories (5.9L Only)
3
02-22-2009 09:02 PM
Invictus
3rd Gen High Performance and Accessories (5.9L Only)
3
06-24-2006 10:54 AM