wire tapped problems
#17
Registered User
Join Date: Dec 2002
Location: Visalia
Posts: 513
Likes: 0
Received 0 Likes
on
0 Posts
Did you use the scotch-lok on the pump wire??? I am real gun shy of those connectors. Double check to make sure it has not cut all the way thru the wire.
The one I had problems with would work and then not work. Everytime I would hit a bump..it would not work. You know the bad part about it was that it was a tap into the lift pump to signal the push pump that was added to the truck by the prior owner.
When I finally traced the wire down to the lp...the lp wire fell apart in my hand..
Rick
Anti-scotch-loks
The one I had problems with would work and then not work. Everytime I would hit a bump..it would not work. You know the bad part about it was that it was a tap into the lift pump to signal the push pump that was added to the truck by the prior owner.
When I finally traced the wire down to the lp...the lp wire fell apart in my hand..
Rick
Anti-scotch-loks
#18
Administrator / Scooter Bum
The dealers are also learning to look for fueling abnormalities in the ECM history indicating a "Performance Enhancement " has been connected.
Thread
Thread Starter
Forum
Replies
Last Post
91rangerturbo
Performance and Accessories 2nd gen only
12
10-16-2007 06:46 AM
DieselDiehard
Performance and Accessories 2nd gen only
12
12-28-2005 06:33 PM
bws
Performance and Accessories 2nd gen only
7
04-03-2005 08:56 PM
TPilaske
Performance and Accessories 2nd gen only
16
11-22-2002 08:15 PM