will this turbo be to big?
10-24-2005, 09:25 PM
#1
Registered
Thread Starter
Join Date: Jul 2005
Location: Omaha, AR
Posts: 4,173
Likes: 0
Received 0 Likes
on
0 Posts
will this turbo be to big?
alright. it says its a htb2 and thats what paul said that i needed. But i dont know anything about the 66 sledpuller???? will this be to big or just right?here
10-24-2005, 09:30 PM
#2
Registered User
Join Date: Oct 2005
Location: Blanket TX--Odessa TX
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
go to www.htturbo.com and it tells u all about the sledpuller 66
it will make a lot of power if i had the money i would get it
jake
it will make a lot of power if i had the money i would get it
jake
10-24-2005, 09:34 PM
#4
Registered
Thread Starter
Join Date: Jul 2005
Location: Omaha, AR
Posts: 4,173
Likes: 0
Received 0 Likes
on
0 Posts
HTBG - 350-425 HP 950 ft. lbs. torque
HTB2 - 450-500 HP 1050 ft. lbs. torque
HTB2/64 - 500-550 HP 1150 ft. lbs. torque (KILLER B-2)
HTB2/66 - 550-600 HP 1225 ft. lbs. torque (SLED PULLER 66)
ok so its a little to big. like by 100 hp or so. ( i think im around 425 to 450) time for more fuel
HTB2 - 450-500 HP 1050 ft. lbs. torque
HTB2/64 - 500-550 HP 1150 ft. lbs. torque (KILLER B-2)
HTB2/66 - 550-600 HP 1225 ft. lbs. torque (SLED PULLER 66)
ok so its a little to big. like by 100 hp or so. ( i think im around 425 to 450) time for more fuel
10-25-2005, 11:31 AM
#5
Registered User
If your coming from a stock turbo...it will be a big difference! You have the fuel to drive it...but it WILL come up sloooower.
Can you use a Sledpuller 66 with an exhaust brake??
RJ
Can you use a Sledpuller 66 with an exhaust brake??
RJ
Thread
Thread Starter
Forum
Replies
Last Post
JSCumms2000
Performance and Accessories 2nd gen only
20
05-06-2007 02:14 PM
Shaders 24v
General Diesel Discussion
14
08-11-2003 10:18 AM