Will 315's Fit
10-13-2004, 03:10 PM
#1
Registered User
Thread Starter
Join Date: Sep 2004
Location: JACKSONVILLE,FL BETWEEN HELL&HIGHWATER
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
Will 315's Fit
will 315-75-16 fit 02 2500 4wd qc ctd on stk 16-8 wheel no lift
sits pretty high now might have some kind of susp pkg looks stk
though
sits pretty high now might have some kind of susp pkg looks stk
though
10-13-2004, 05:06 PM
#2
Registered User
Join Date: Oct 2004
Location: Wildomar, Calif.
Posts: 697
Likes: 0
Received 0 Likes
on
0 Posts
I have 305/70/16 and they just rub a tiny bit on the plastic wheel well turning and hitting a bump at the same time.
305/70 wont be as tall as 305/75 so 315/75 will be even taller.
These 70 series tires were on my truck when I got it . I think ill go back to 75 s on my next set.
In my old age 47, wide tires on this truck just hit more rocks and kick up more debree on dirt roads. must be getting more practicle in my old age, not much though
I have 35/12.5/16.5s on my old chevy but it has 4.10s and a 4" lift.
305/70 wont be as tall as 305/75 so 315/75 will be even taller.
These 70 series tires were on my truck when I got it . I think ill go back to 75 s on my next set.
In my old age 47, wide tires on this truck just hit more rocks and kick up more debree on dirt roads. must be getting more practicle in my old age, not much though
I have 35/12.5/16.5s on my old chevy but it has 4.10s and a 4" lift.
10-13-2004, 08:06 PM
#6
Registered User
Join Date: Jun 2004
Location: Tillsonburg, Ontario, Canada
Posts: 307
Likes: 0
Received 0 Likes
on
0 Posts
I got the Hummer rims and Tires and they are 315/70R17s I am pretty sure and they didnt rub at all but now I put some nerf bars on my truck, the tires rub them. So i guess Its time for some D25s...
Trending Topics
10-13-2004, 11:55 PM
#9
Registered User
Join Date: Aug 2002
Location: Sundre, Alberta
Posts: 1,257
Likes: 0
Received 0 Likes
on
0 Posts
GSP.......I'm going to assume "What's that big red hose" question is for me?
I got rid of the breather bottle off the front of the motor and used an 8 ft length of heater hose to run the breather down under the drivers door. Zero mess on the front of the motor and no oil smell after oil changes.
I got rid of the breather bottle off the front of the motor and used an 8 ft length of heater hose to run the breather down under the drivers door. Zero mess on the front of the motor and no oil smell after oil changes.
Thread
Thread Starter
Forum
Replies
Last Post
PourinDiesel
3rd Gen Engine and Drivetrain -> 2003-2007
15
05-27-2006 07:12 PM
dodgedude361
3rd Gen High Performance and Accessories (5.9L Only)
5
04-08-2005 03:42 PM
Performance and Accessories 2nd gen only
11
10-02-2003 09:06 PM
Crabjoe
3rd Generation Ram - Non Drivetrain - All Years
3
09-16-2003 09:23 AM