i did a search and found way to many results on turbos so i figured i would post up and see what you guys think is my best bet. I have a 2001 2500 with 80hp injectors, DTT trans, edge juice with attitude, afe intake, intake manifold, bd flowmax lift pump. what turbo would be the best set up for my truck? the turbo is holding me back right now as its stock. also the best place to pick one up would be great too.thanks

 

I would think a 62/65/14 would be a pretty good turbo for you. It should spool pretty darn good and flow a lot better on the top end.

You have the HY35, so you will definately love a bigger turbo. It will run much better on the top end. Even with my HX40, my truck runs a decent bit better on the top side from the better exhaust flow.

Eric

 

ok thanks and who makes these.. any place you recommed to get one?

 

Almost any place that sells Schwitzer turbo's for our trucks.

Engineered diesel is a great place to get one. Call them up and get a price from them. They seem to be a little better priced than a lot of the other places, and they have great customer service.

http://www.engineereddiesel.com/

Eric

 

Redneck is it turbo buyin time for ya?! Im jealous!

I also say a 62/65/14 or 12 would be a great size. Im planning on that size from industrial injection.
Ive been kinda considering a 62/65/13 from HTT also.

Enginered diesel is a name thats comin up alot lately, I hear they have a bit better prices as well.

I like the phat shaft series from II cause they are local to me and I have alot friends runnin em here and lovin em.

 

you can't go wrong with HTT I love mine

 

A 62mm sized charger makes sense. A 62/65-13ss would be a great top turbo for a set of compounds down the road.

If you are never, ever going that route, look at a 62/71-13ss

Dave