Performance and Accessories 2nd gen only Talk about Dodge/Cummins aftermarket products for second generation trucks here. Can include high-performance mods, or general accessories.

What do you'all think about these hp#s with my set-up

Thread Tools
 
Search this Thread
 
Old 06-13-2007 | 12:27 PM
  #1  
Smokin98.5's Avatar
Thread Starter
Registered User
 
Joined: Dec 2006
Posts: 91
Likes: 0
From: Lynden, Wa
What do you'all think about these hp#s with my set-up

496.93hp\960.13tq on 5x5.
352.96hp\680.82tq comp turned off.
Done at MPS(360-398-2353) in Lynden,WA on a Dynojet dyno. temp 73F humidity 36%.

Thanks to Tim @MPS

Oh and I did a run with the MAP unpluged and gained no hp and lossed 30tq.
But I did gain smoke and some times you do need that.
Old 06-13-2007 | 12:45 PM
  #2  
getblown5.9's Avatar
Banned
 
Joined: Jan 2005
Posts: 2,997
Likes: 0
From: Baltimore, MD
seems about right to me!
Old 06-13-2007 | 12:51 PM
  #3  
Metalman's Avatar
Registered User
 
Joined: Dec 2006
Posts: 42
Likes: 0
From: Lexington, N.C.
Congrats on those numbers. I'll bet those rear tires are hurtin when your send all 496hp at them. You will definitely need slicks if you go to the strip.
Old 06-13-2007 | 01:32 PM
  #4  
Mike D's Avatar
Chapter President
 
Joined: Nov 2003
Posts: 3,807
Likes: 1
From: Rural Hall, NC
Those are good numbers.
Old 06-13-2007 | 05:26 PM
  #5  
HOHN's Avatar
Registered User
 
Joined: Apr 2003
Posts: 6,564
Likes: 6
From: Cummins Technical Center, IN
That's gettin' scary close to 500! Good job!
Old 06-13-2007 | 06:37 PM
  #6  
Big Blue24's Avatar
Registered User
 
Joined: Jan 2007
Posts: 2,051
Likes: 2
From: Las Vegas, NV
Seems that the comp netted you 144 HP to the ground, wow! Is that a Hot/Drag Comp or regular?
Old 06-13-2007 | 07:03 PM
  #7  
Smokin98.5's Avatar
Thread Starter
Registered User
 
Joined: Dec 2006
Posts: 91
Likes: 0
From: Lynden, Wa
Just the Comp race (normal). I think the extra horse is from the turbo being to big for the truck without more fuel.
Old 06-13-2007 | 07:50 PM
  #8  
Big Blue24's Avatar
Registered User
 
Joined: Jan 2007
Posts: 2,051
Likes: 2
From: Las Vegas, NV
Makes sense, did you happen to see what kind of boost you were building with the comp off?
Old 06-14-2007 | 11:42 AM
  #9  
Smokin98.5's Avatar
Thread Starter
Registered User
 
Joined: Dec 2006
Posts: 91
Likes: 0
From: Lynden, Wa
No I didn't pay attention. I was running 40psi max(5x5) and the most it'll go on 1x1 is 35psi. So probably 35psi with it off.
Old 06-14-2007 | 11:54 AM
  #10  
mysterync's Avatar
Registered User
 
Joined: Jan 2004
Posts: 1,143
Likes: 0
From: Blowing Rock,NC
We Pulled the exact numbers on the exact same setup a few weeks ago at our dyno day! Seems very consistent! Good Numbers!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Farmall Power
3rd Gen High Performance and Accessories (5.9L Only)
2
06-21-2009 10:46 PM
77machomopar
1st Gen. Ram - All Topics
12
01-24-2008 07:08 AM
Aggie007
3rd Gen High Performance and Accessories (5.9L Only)
5
12-14-2007 11:32 AM
Iron Horse
Other
33
03-16-2004 10:30 PM
Shaders 24v
Other
10
02-20-2004 06:54 PM



Quick Reply: What do you'all think about these hp#s with my set-up



All times are GMT -5. The time now is 02:24 PM.