Ph4tty

I got a 2016 code so I went to reinstall my lift pump. I used the vulcan relo and line kit off ebay for $85 and a carter pump from napa. Time spent- 8-10 hours for mr mechanically challenged =| Got the FP guage hooked up while I was at it. Got the truck started and I've got the FP guage pegged at 15psi at idle. I haven't gone out to see how much it drops at WOT. I just wanted to take a moment to thank ya'll for your advice and hopefully I saved my VP$$. =P

Edit- initial testing shows 15 psi at idle 14 at cruise and won't drop below 12 at WOT

Tiny

I put the Vulcan kit on yesterday as well, and so far I cannot pull mine below 15psi WOT. But I added a Holley Blue to the stock LP, so that made a big difference. I feel much better now knowing the VP44 will stay cool.