Vulcan kit question
#16
Registered User
Join Date: May 2004
Location: Diamond Springs, ca
Posts: 936
Likes: 0
Received 0 Likes
on
0 Posts
just finished my install. over all im happy. the kit is quality. But what i didnt like was either my truck is weird or its just a pain on a shortbed but i had to mount the pump next to teh front dline cv almost or make another braket for the LP. I found this lame because i cut about 2 feet off the long line from the FF to the LP. Plus there was no way the short line from the tanks hard line to the 3/8s input on the LP was going work without kinking if i mounted it closer and i would have been able to to turn a pipe cutter in there... Either way. its in and not leaking... saw some improvments.....
Old stock set up would idle at 12 and WOT at below 5 easily...
New set up = 14 idle and could not get it to drop below 11 on 5x5 up a hill empty load...
so that made me happy..
jiMMy
Old stock set up would idle at 12 and WOT at below 5 easily...
New set up = 14 idle and could not get it to drop below 11 on 5x5 up a hill empty load...
so that made me happy..
jiMMy
Thread
Thread Starter
Forum
Replies
Last Post
98ramcummmins
Performance and Accessories 2nd gen only
3
05-10-2009 09:14 AM
SilverRam01
Performance and Accessories 2nd gen only
10
07-31-2005 03:35 PM
SuperDave4x4
Performance and Accessories 2nd gen only
8
07-09-2005 02:49 PM