Performance and Accessories 2nd gen only Talk about Dodge/Cummins aftermarket products for second generation trucks here. Can include high-performance mods, or general accessories.

twins question

Thread Tools
 
Search this Thread
 
Old 02-26-2007 | 11:09 PM
  #1  
jd4440's Avatar
Thread Starter
Registered User
 
Joined: Jan 2006
Posts: 63
Likes: 0
From: Suring, WI
twins question

alright been doing some searching and it seem that i could put a s400 under my s300 (like rips twins) its none wastegated so i have i adapter which i think would give a good amount room hopefully just wondering if it would be a possible route i do some truck pulling and i do some hauling and it is streeted and want to move up to bigger injectors someday ddp/machs 150-200 what does anyone think
Old 02-27-2007 | 06:25 AM
  #2  
j-fox's Avatar
Registered User
 
Joined: Mar 2002
Posts: 2,541
Likes: 1
I think that was a very tough sentence to read!!!!
You don't have enough fuel to justify twins. You will be dissappointed until the injectors are in.
Some truck pulls don't allow twin turbos.
Old 02-27-2007 | 06:46 AM
  #3  
gwhammy's Avatar
Registered User
 
Joined: Dec 2003
Posts: 733
Likes: 0
From: NE,Missouri
I have a 3b and a 400 both in twins. The 3b with a 22cm housing makes a great towing setup, spools instantly. The 400 is a little slow, its over a b1. I really like the 35-3b setup for the street,the b1,b2 isn't bad but not as fast as the little twins.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
dodgediesel
ABDTR #5
3
10-18-2011 10:22 PM
dodgediesel
ABDTR #5
496
10-16-2011 05:33 PM
dodgediesel
3rd Gen High Performance and Accessories (5.9L Only)
17
04-05-2011 12:21 PM
Stock 02
Performance and Accessories 2nd gen only
28
09-24-2006 12:09 PM
stlsparky
3rd Gen High Performance and Accessories (5.9L Only)
9
11-21-2005 11:02 PM




All times are GMT -5. The time now is 07:38 AM.