When i look at the kits for twins they always say the heat/cooler on the block is removed my question is what do you do with the lines going to it?

Also when i go to get on it in the morning after i let i warm up, it pops and won't rev up and acts like its running on 2 cyclinders but once i get it to boost it gets better, but even when its warm and been running for a while it will do it occasionally?

 

plug the water lines to the heater/ cooler make sure the one going to the heater core still goes there then on the trans just run a line to the cooler in the frount . just watch the trans temps in town towing if its to high put a elec fan on the outside of the cooler on the frount flip it on when it gets hot