Turbo measurement ?????
07-02-2007 | 10:39 PM
#1
Thread Starter
Registered User
Joined: Apr 2007
Posts: 433
Likes: 0
From: Montana
Turbo measurement ?????
Ok I'm sure for all you real serious coal burners, this is a remedial question but... I just ordered a HTT 62/71/13ss and I'm just wondering how I would measure this to make sure it's the right one.( Had problems with the company I ordered it from their a little SLLOOOOOOWWWWWWW!!!!)
) Anyhow call me paranoid 
but just curious it will be the right one Thanks for any info guys.
) Anyhow call me paranoid but just curious it will be the right one Thanks for any info guys.
07-02-2007 | 11:18 PM
#2
Chapter President
Joined: Nov 2003
Posts: 3,807
Likes: 1
From: Rural Hall, NC
The 62 mm will be measured at the front side of the compressor wheel and the 71 will be measured at the backside of the turbine wheel, you have to take the exhaust housing off to measure the turbine wheel. Each wheel has and inducer side and an exducer side, if that make sense and I understand it correctly. 
If it's ok?
Thread
Thread Starter
Forum
Replies
Last Post
dcorneli
3rd Generation Ram - Non Drivetrain - All Years
11
03-12-2004 09:13 AM