Turbo advice
#1
Registered User
Thread Starter
Turbo advice
Looking to get a new turbo and 150hp injectors, I tow on occasion but mostly a DD. I'm thinking about going the 62/14 route but have no real knowledge of turbo's. Is this a good choice with the mods in my sig + the new 150hp injectors I'll be getting along with it? Am i going to see more boost and faster spool? What about price? There are some on ebay for $1400, that pretty reasonable?
#2
Registered User
Join Date: Dec 2008
Location: San Diego, CA.
Posts: 275
Likes: 0
Received 0 Likes
on
0 Posts
I would suggest a Bell WSBG. They are ~$1400 with any stock core and well worth it. I got mine and I will probably never run any other brand. They are completely built by him and the wheels and shaft are cryo frozen. It is only a 56mm but It flows more than a 64 Schweitzer and way more psi. I can get 60 cool psi out of it at 4200ft. Its a freak of nature. The guy builds them in Corvallis, OR.
#3
Registered User
Join Date: Apr 2007
Location: SLC, Ut. 4,200 ft.
Posts: 990
Likes: 0
Received 0 Likes
on
0 Posts
62/ what /14?
65 or 71?
Either would do good. A 62/71/14 would prob do ya real good with new 150's actually.
Do Not Buy Off Ebay! Not for a turbo atleast.
You can get dooped into getting a POS china made turbo cause they are so cheep, and they dont give you near enough info on it.
JMO.
65 or 71?
Either would do good. A 62/71/14 would prob do ya real good with new 150's actually.
Do Not Buy Off Ebay! Not for a turbo atleast.
You can get dooped into getting a POS china made turbo cause they are so cheep, and they dont give you near enough info on it.
JMO.
Thread
Thread Starter
Forum
Replies
Last Post
dodgemaniac
Competition / Pulls / OffRoad
12
07-31-2008 10:15 AM
ryan466
3rd Generation Ram - Non Drivetrain - All Years
3
08-30-2006 10:10 AM
2broke2smoke
Performance and Accessories 2nd gen only
45
01-26-2004 03:59 PM
Hawkeye
Performance and Accessories 2nd gen only
13
09-17-2003 11:04 AM