hey guys not so much of an emergency but definatly something i need answered before the end of today...i found a fairly good deal on a bd super b turbo.This is what the seller told me (it came off of a 3rd gen twin setup but it does not have the elbow pre-molded into the intercooler/discharge side of the charger, so I believe it can be used in a 2nd gen setup).

My question is the turbo is off of an 3rd gen truck belive 03 i am wondering if this would work on my 99 2nd gen and if so what i would have to do to make it work any information is greatly appreciated thank you- chris

 

Depending on the year that the turbo came off of there would be a few parts you would need. You need an HX40 downpipe and a few other small pieces to make it work.

 

alrigth sweet well you seem to be the man to talk to pat considering your sig haha could you let me know what else would be required i belive it is coming off of an 03

 

What other minor parts.. I have 2nd Gen.. O1 and I have the hx40 and down pipe ready to be installed. Noticed the pipe I recieved is 4' through out.. and I will have to cut the original.. it was not the easy bolt on both ends as it had implied when i purchased it. Please let me know any ideas as this it the first time I have dealt with any of this. Thinking I will need to have a transistion pipe made to fit 4" to the stock pipe going to the cat.