Tst dissapoints =(
#16
Registered User
Join Date: Nov 2003
Location: St.Helena, CA.
Posts: 839
Likes: 0
Received 0 Likes
on
0 Posts
We dynoed a truck with a SPS66 (slightly larger than your 64 but not that much) Drag Comp, and Mach 4's and made over 600 RWHP!
#17
Registered User
like the other guys have said, check your connections. When I first installed my PM3 Comp, the power light and b00st light on the box would light, and fuel & b00st on the remote, but no fuel on the box. Solution re-tap the ground wire. I used the BD stealth plate on the pump. Now Ph4tty, granted your setup is different than mine, but with the TST on 9, hold on
#18
Registered User
Also, might ck the inline fuse (5v I think)....if you have not already! Mine looked good but turned out to not be. Yellow & red Lts. were strong but Green was not...I would just replace it to eliminate one possibility.
#21
Registered User
Join Date: Apr 2002
Location: Hershey, PA
Posts: 1,250
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by CTD_Neil
Wow, I need to go make a pull on that dyno. What else was done to that truck?
#22
Registered User
Thread Starter
Join Date: Aug 2005
Location: fredericksburg, virginia
Posts: 3,465
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Jetpilot
Something isn't right.... As mentioned check all of the connections and ensure they are all good. You should see almost a 100 RWHP gain from the TST with all of your mods. We dynoed a truck with a SPS66 (slightly larger than your 64 but not that much) Drag Comp, and Mach 4's and made over 600 RWHP!
Edit: The above mentioned truck was also running a HRVP.
Doug Smith
Edit: The above mentioned truck was also running a HRVP.
Doug Smith
#24
Registered User
Thread Starter
Join Date: Aug 2005
Location: fredericksburg, virginia
Posts: 3,465
Likes: 0
Received 0 Likes
on
0 Posts
Positap is broken. I can't get the connectors I bought yesterday on there. I'm lacking in soldering skill. I may just need a pump cover. So to be continued...
#26
Registered User
Thread Starter
Join Date: Aug 2005
Location: fredericksburg, virginia
Posts: 3,465
Likes: 0
Received 0 Likes
on
0 Posts
I couldn't find them at walmart
Tommorrow I'll try taking another positap and use that to replace the broken tap at the pump wire and use the connectors I bought for the ground, which is easier to get to.
Tommorrow I'll try taking another positap and use that to replace the broken tap at the pump wire and use the connectors I bought for the ground, which is easier to get to.
#27
Chapter President
http://www.posi-lock.com/retailers.html
I was just going by their web-site.. i did by mine at O'reilly's..
I was just going by their web-site.. i did by mine at O'reilly's..
#28
Registered User
Join Date: Sep 2003
Location: Plano, TX
Posts: 2,534
Likes: 0
Received 0 Likes
on
0 Posts
I have driven Rowlands truck with and without the PM3 on.....and you can tell a HUGE differance in power.....no question! Im sure they have a diagnosis setion in the install manual......go over that with a flea comb......these boxs that make you tap wires (Blue Chips, TST, Comp), a bad connection can screw up the whole thing...it may look good....but its not. Just keep at it! Im sure you will figure it out! You got a good source on here for help!
#30
Registered User
Thread Starter
Join Date: Aug 2005
Location: fredericksburg, virginia
Posts: 3,465
Likes: 0
Received 0 Likes
on
0 Posts
Still disappointed. It may do me some good racing or on a dyno but not much of a difference on the street. I did a little country drag racing and managed to hit 1300 on the pyro- so I know more fuel is there.
I've been riding the bike for the last week so the trucks pretty much parked until the the rain comes back. Then testing will continue =P
I've been riding the bike for the last week so the trucks pretty much parked until the the rain comes back. Then testing will continue =P