Performance and Accessories 2nd gen only Talk about Dodge/Cummins aftermarket products for second generation trucks here. Can include high-performance mods, or general accessories.

Track Times

Thread Tools
 
Search this Thread
 
Old 01-27-2004 | 09:18 PM
  #1  
SjLingenfelter's Avatar
Thread Starter
Registered User
 
Joined: Jan 2003
Posts: 1,113
Likes: 0
From: Sugarland,College Station, Mason, TX
Track Times

What do you think I could run with.......
130hp Big Hoss Chip
Hx40/18cm
ATS tranny

1/4 and 1/8 would be aprecaited

Sean
Old 01-27-2004 | 09:38 PM
  #2  
y-knot's Avatar
Banned
 
Joined: Aug 2003
Posts: 609
Likes: 0
From: Kentucky
54 mph @ 12.7 sec 1/8
68 mph @ 18.7 sec 1/4
Old 01-27-2004 | 09:44 PM
  #3  
SjLingenfelter's Avatar
Thread Starter
Registered User
 
Joined: Jan 2003
Posts: 1,113
Likes: 0
From: Sugarland,College Station, Mason, TX
I want to know what i will run after the mods.
Old 01-27-2004 | 10:50 PM
  #4  
PourinDiesel's Avatar
Registered User
 
Joined: Jan 2002
Posts: 5,352
Likes: 0
From: Southern, Indiana
Are you dead set with the mods you have listed??

I would forget about the 18cm housing and Big Hoss chip.

I would keep the HX40w/16cm housing, also get the ATS race tranny setup.
I would also suggest that you use the Edge Drag Comp.

You are also going to need a set of injectors.

To answer your question:

15's at about 84 mph.
Just a guess.

--Justin
Old 01-28-2004 | 10:28 AM
  #5  
SjLingenfelter's Avatar
Thread Starter
Registered User
 
Joined: Jan 2003
Posts: 1,113
Likes: 0
From: Sugarland,College Station, Mason, TX
Im not gonna do injectors just yet Im fixin to have the turbo sent up to me and the chip is on its way and tryin to find a place where i can get the tranny at. Will that tranny be ok with pulling a 3 horse trailer with walk tackroom?
Old 01-28-2004 | 11:37 AM
  #6  
PourinDiesel's Avatar
Registered User
 
Joined: Jan 2002
Posts: 5,352
Likes: 0
From: Southern, Indiana
The tranny will be fine.
ATS backs it up with a great warranty.

--Justin
Old 01-28-2004 | 01:09 PM
  #7  
SjLingenfelter's Avatar
Thread Starter
Registered User
 
Joined: Jan 2003
Posts: 1,113
Likes: 0
From: Sugarland,College Station, Mason, TX
Aight cool thanks Justin.
Old 01-28-2004 | 03:59 PM
  #8  
BigBlue's Avatar
Banned
 
Joined: Feb 2002
Posts: 0
Likes: 0
The stock tranny won't last very long with that turbo and chip. I'm almost willing to bet that as soon as he floors it, he's gonna roast the TC and possible something else. And there ain't no way in the world the tranny is going to pull the trailer. You better put the tranny in before you do the other stuff.
Old 01-28-2004 | 05:33 PM
  #9  
SjLingenfelter's Avatar
Thread Starter
Registered User
 
Joined: Jan 2003
Posts: 1,113
Likes: 0
From: Sugarland,College Station, Mason, TX
The ATS will be on its way in feb. after a house is sold. Once that happens were gonna be workign on it day after day and going to the track almost every friday.
Old 01-28-2004 | 08:51 PM
  #10  
PowerstrokeThis's Avatar
Registered User
 
Joined: Dec 2003
Posts: 338
Likes: 0
From: Sugar Land, Texas
My truck is the one were gonna be using.
Old 01-30-2004 | 01:02 AM
  #11  
MCummings's Avatar
Registered User
 
Joined: Feb 2003
Posts: 1,123
Likes: 0
From: Laredo, Tx, 7 hours south of Dallas
PM Me,, I have some injectors a guy backed out of,,,, special made, DD5's. Hand tuned by keith Locklier, at 180+HP over stock, supposed to be used with NOS, but I never did. Freshly rebuilt, pop-offs set, and balanced.

They Are ready to go, PM me.

Merrick
Old 01-30-2004 | 01:27 PM
  #12  
SjLingenfelter's Avatar
Thread Starter
Registered User
 
Joined: Jan 2003
Posts: 1,113
Likes: 0
From: Sugarland,College Station, Mason, TX
Check your messages bro.

Im guessing that i will have to get a new pump too? PE maybe?
Old 03-31-2004 | 10:03 AM
  #13  
PowerstrokeThis's Avatar
Registered User
 
Joined: Dec 2003
Posts: 338
Likes: 0
From: Sugar Land, Texas
Banks Big Hoss Chip works great and I floored it and I didn't roast the Tranny BigBlue(Tyler)!
Old 03-31-2004 | 12:12 PM
  #14  
BigBlue's Avatar
Banned
 
Joined: Feb 2002
Posts: 0
Likes: 0
Give it time young grasshopper. I roasted mine with the Edge Comp on the 100hp setting towing a 4 wheeler trailer. You'll roast it. Give it time. Maybe not right away, but you will do it.

As far as pumps go, I'd say save your money and go with the FASS system. Or a Holley blue/stock combo. What pump did holiday have to replace on your truck the other day?
Old 04-01-2004 | 06:11 AM
  #15  
SjLingenfelter's Avatar
Thread Starter
Registered User
 
Joined: Jan 2003
Posts: 1,113
Likes: 0
From: Sugarland,College Station, Mason, TX
They had to replace the lift pump or fuel pump whatecver you wanna call it. Once some things get settled were gonna go get a holley black.


Quick Reply: Track Times



All times are GMT -5. The time now is 10:32 PM.