Super B special....first impression
#31
Banned
Thread Starter
I got to tow my mini excavator today. Total load with trailer, auger, bits, buckets & machine is around 12k#. The charger did everything I wanted it to do. I ran Smarty sw4 default & Adrenaline PL04 [timing 10, fuel stretch 1800]. I pulled a few big hills & some were from dead stop at bottom. To my surprise, this charger spools better with a load. It felt about the same as my old 62/71/14 as far as spoolup goes, but cools things down better. My max egts were 1276* & 55psi boost from reading on Pulse monitor datalogger. I am very happy with this setup & my brother is very disappointed that I will be keeping this charger.
#34
Registered User
You have more boost than me, I had 53 psi before my o-ring install, now it peaks at 50, I wonder if your boxes vs my drag comp have something to do with it, since I have one step up on the sticks. Nice to hear you like it, I like mine so far, had my charger since Feb. 08.
#35
Banned
Thread Starter
#36
Banned
Thread Starter
You have more boost than me, I had 53 psi before my o-ring install, now it peaks at 50, I wonder if your boxes vs my drag comp have something to do with it, since I have one step up on the sticks. Nice to hear you like it, I like mine so far, had my charger since Feb. 08.
#37
Banned
Thread Starter
#38
Chapter President
#39
Banned
Thread Starter
#40
Registered User
Join Date: Dec 2006
Location: Red Deer, Alberta
Posts: 303
Likes: 0
Received 0 Likes
on
0 Posts
That's good to hear its working fine for you. I guess I am gonna have to tighten up my wastegate alittle more then, I have it opening at 45psi but on level 10 I can still see 1500.
#41
Banned
Thread Starter
I was running the Torq tune with Smarty sw4. I was in the throttle pretty good & this thing just keeps its cool. I do have a 3rd gen turbine housing & exhaust brake. Not sure if that helps or not?
#42
Registered User
Join Date: Dec 2006
Location: Red Deer, Alberta
Posts: 303
Likes: 0
Received 0 Likes
on
0 Posts
I have just an older comp tune with pump stretch at 2000, and like I said it can get alittle warm but manageable. I just finished putting a CR head on and it looks like it will flow quite a bit more air so before I play with anything I want to see what difference that makes.
#43
Banned
Thread Starter
I have just an older comp tune with pump stretch at 2000, and like I said it can get alittle warm but manageable. I just finished putting a CR head on and it looks like it will flow quite a bit more air so before I play with anything I want to see what difference that makes.
#44
Banned
Thread Starter
I got to sled pull with this turbo for the first time last night [Friday]. I ran 2nd gear high range & had no problem at all building boost at the line. I checked the datalogger when the pull was over.
Max rpm 4116
Max speed 26mph
Max egt 1706*
I don't have a video of the pull, but a fellow member did video the pull. If he sends it to me, I'll post a link.
Max rpm 4116
Max speed 26mph
Max egt 1706*
I don't have a video of the pull, but a fellow member did video the pull. If he sends it to me, I'll post a link.
#45
Registered User