RowJ

The DTB/03 trackbar from http://www.solidsteel.biz/order.htm will fit.



RJ

mkubacak

A picture is worth a thousand words!! It looks as if though the mount moves the pivot point further towards the driver side of the vehicle. Is that the case, or are my eyes playing tricks on me?

Thanks again for the picture!

RowJ

Don't think so....at least, not that I recall.

RJ

LanceD

I made my own setup, here is the link:
LINK

I have had it since august, so almost a year, I have since changed it around a little bit, I moved the tie rod to under the knuckle instead of on top, and the original install was on a dodge D60, since then I have installed a Ford D60 and had to shorten it up just a tad, but all the heims are still tight as new.

cumminsboy

With the bulk of the heim joints, do any of yall know if Thurens cross-over kit will work with stock alloy wheels on an 01?

Cowhand

The heims take up less space than the TRE's do....so they should fit. You can always call Don and confirm....

LanceD

yea unless you get the high misalignment ones, but you shouldn't need those with a stock truck.