Speedo-tach
#1
Registered User
Thread Starter
Join Date: Oct 2004
Location: NV
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
Speedo-tach
Has anyone changed their instrument panel? I found one on ebay that looks like stainless. I think it must involve removing the needles. has anyone done this and is it very difficult?
#2
Registered User
Join Date: Jan 2005
Location: eastern pa
Posts: 915
Likes: 0
Received 0 Likes
on
0 Posts
I just tore into mine last week to put blue gel paper behind it. yes you have to remover the needles, there is a tool for it or i used a flet screw driver. they pop straight out. My obnly problem is i didnt set my speedo back on right some how, every other guage workes fine but my speedo is 10mph slower now . i really dont care because i drive by my rpms because my speedo was never right since i put the bigger tires on. But they are fairly simple to work with.
Thread
Thread Starter
Forum
Replies
Last Post
royta
12 Valve Engine and Drivetrain
47
07-17-2008 06:32 AM
ajohnson007
12 Valve Engine and Drivetrain
4
12-15-2005 07:37 PM
Crabjoe
3rd Generation Ram - Non Drivetrain - All Years
1
06-09-2004 05:13 AM