Specifications for o-ringing the head
#1
Registered User
Thread Starter
Join Date: Mar 2005
Location: Amherst, WI
Posts: 1,146
Likes: 0
Received 0 Likes
on
0 Posts
Specifications for o-ringing the head
Is anyone willing to divulge the specs needed to install/machine the O-rings in a 12 Valve head, so I can give them to a machine shop?
I'd appreciate it.
Thanks in advance.
I'd appreciate it.
Thanks in advance.
#6
Registered User
Thread Starter
Join Date: Mar 2005
Location: Amherst, WI
Posts: 1,146
Likes: 0
Received 0 Likes
on
0 Posts
#7
Registered User
Join Date: Apr 2002
Location: Hershey, PA
Posts: 1,250
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#9
Registered User
Thread Starter
Join Date: Mar 2005
Location: Amherst, WI
Posts: 1,146
Likes: 0
Received 0 Likes
on
0 Posts
Here are the specs thanks to Doug at PDW.
41 or 51 thousansandths wire
10-12 thousansandths protrusion, reccomend 10 for most cases unless extreme horsepower, requires several re-torquing.
Use a hard wire material, NOT copper.
Stainless steel wire is best.
Cut ring so that it centers on head gasket fire ring.
41 or 51 thousansandths wire
10-12 thousansandths protrusion, reccomend 10 for most cases unless extreme horsepower, requires several re-torquing.
Use a hard wire material, NOT copper.
Stainless steel wire is best.
Cut ring so that it centers on head gasket fire ring.
#11
Registered User
Join Date: Apr 2002
Location: Hershey, PA
Posts: 1,250
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
The_Head
1st Gen. Ram - All Topics
17
06-28-2011 09:25 PM
GO 4LO
Performance and Accessories 2nd gen only
19
05-05-2004 03:25 PM