silencer ring
#1
silencer ring
I told my friend how i did this mod and he talked to a service manager at interational who told him that taking it out can cause something called "dusting off" the motor which can cause particles to get in the cylinder walls and scar them. Not short term but after a while. I think this is bull cause if the particles are gonna get in with it gone, then why not with it there, anyone know anything specific about this
#2
It's a load of bull. Don't know about dislodging particles, that entire area should be free from particles. Since the air that goes to the turbo is filtered. IMO that international guy is full of it.
#5
I agree.....total BS...I pulled mine yesterday, the only 'particles' that could get into mine were caused be the edge of the screwdriver i used to start prying the retaining ring out, it slipped on the first twist and scraped a tiny sliver of alum. from the housing (removed obviously). The new sing isn't very noticable with the stock air box that will be resolved shortly.
#7
thanks guys, its exactly what i was thinking total
haha thats what i said to him. My rig really sings and i still have the stock box, hmmm
Oh well, some people will always think theyre right, despite the obvious
pulled mine yesterday, the only 'particles' that could get into mine were caused be the edge of the screwdriver i used to start prying the retaining ring out, it slipped on the first twist and scraped a tiny sliver of alum. from the housing (removed obviously).
Oh well, some people will always think theyre right, despite the obvious
Thread
Thread Starter
Forum
Replies
Last Post
RonP
3rd Gen Engine and Drivetrain -> 2003-2007
6
02-17-2010 09:30 AM
RRC
3rd Gen Engine and Drivetrain -> 2003-2007
2
05-13-2007 11:45 PM