Revised ARP head stud kit out for 12V, Heads up.
07-29-2006, 09:55 PM
#1
Registered User
Thread Starter
Join Date: Feb 2004
Location: CT
Posts: 613
Likes: 0
Received 0 Likes
on
0 Posts
Revised ARP head stud kit out for 12V, Heads up.
I got my stud kit from ARP today, P/N 247-4203.
After perusing the directions I see where the rocker pedestal bolts use to have an issue with valve cover clearance they came up with a design change to support this.
The kit now comes with shorter rocker arm pedestal head studs, and requires machining of the rocker arm pedestal .200 in deep X 1.1000 in where the stud goes through the pedestal for valve cover clearance.
Guess I will owe my friend who has a Bridgeport miller a few beers
The kit also includes the secondary rocker arm hold down bolts which weren't previously available.
I haven't seen this before so figure Id throw this out there.
No more grinding the valve covers hopefully
After perusing the directions I see where the rocker pedestal bolts use to have an issue with valve cover clearance they came up with a design change to support this.
The kit now comes with shorter rocker arm pedestal head studs, and requires machining of the rocker arm pedestal .200 in deep X 1.1000 in where the stud goes through the pedestal for valve cover clearance.
Guess I will owe my friend who has a Bridgeport miller a few beers
The kit also includes the secondary rocker arm hold down bolts which weren't previously available.
I haven't seen this before so figure Id throw this out there.
No more grinding the valve covers hopefully
Thread
Thread Starter
Forum
Replies
Last Post
SKATERHAULER
12 Valve Engine and Drivetrain
6
09-02-2011 10:57 PM
Megaramasaur
3rd Gen High Performance and Accessories (5.9L Only)
20
03-23-2007 06:51 AM
BigBully
Performance and Accessories 2nd gen only
6
12-17-2006 02:19 PM
dodgediesel
Performance and Accessories 2nd gen only
21
08-13-2006 10:20 PM
Tiger Rag
Performance and Accessories 2nd gen only
33
04-04-2006 08:37 AM