DodgeRam24V

well after 2-3 years of owning this unit, i put it in today.
all seems good, drove it on level 6, wow it gets with it.

my boost is always reading 46 PSI, engine off, running, driving.

i did see how to adjust the fuel pressure but not the boost.

any clue?

i'm going to check this firsts:
voltage readings properly function MAP sensor should show.

Boost - Voltage
0 - 1.045
6 - 1.48
10 - 1.75
15 - 2.05
18 - 2.27
20.5 - 2.44 and so on......

quadzilla adrenaline with pulse monitor

DodgeRam24V

MAP sensor bad, reading high return voltage at zero boost.

i wonder how long it has been bad?

now the Quadzilla reading is lower than my manual gauge, oh well i have 2 gauges to watch now.

that truck barked the tires when hitting second gear today, i haven't heard that sence i had my 340 Dart Swinger 30 years ago!

there is 1 things i have to do now, take the milk crate with my supplies like oil, antifreeze & P/S fluid i carry just in case and my cooler of beer out of the back, they are sliding and rolling all over the place now