qzilla

Are you sure this is the updated tunes as of 3/7/08? I have not had a single flashing issue since we released them and in testing it fixed it for everyone!

Just making sure you got the latest as they have only been up since yesterday evening.

stroker4501

I just tried those today and downloaded them today also qzilla im about to try 2018 right now ill post to see if turbo timer works.

stroker4501

Ok i just downloaded the 2018 and tried it and it didn't turbo time at all three times.mario

stroker4501

just tried the high idle also doesn't work. i cant change mode either like before and just shows PL 0 not PL00 like before.

Haulin Mutt

I downloaded it twice today to make sure. I think I was one of the first ones to get a hardware upgrade. Is there something different in mine?

Model name: DADR9802
Serial Number: BETA0204
Software Version: 20080307
Feature Codes: ADR2018

Thanks

Big Blue24

Quad, I love the bottom end grunt of these Aggressive tunes. I have always struggled to spin the tires, now I don't even have to play with the clutch, just mash it good. This bigger turbo helps out a little too.

qzilla

Ok, PL 0 means you are in warm up mode. All the new tunes will show this when in warm up mode instead of PL00. You will not be able to change the settings while in warmup.

Regardless, the high idle and the TT should work regardless of warm up mode though. That is what I am working on.

qzilla

Ok the other thing that can make it flash is if it is trying to de-fuel.

Do you have the Adrenaline pyro hooked up? I ask because I see your also have regular gauges and the 2018 file has de-fueling enabled on it?

Makes me wonder if the pyro is disconnected or something?

Your box is identical to the production boxes that are going out.

Haulin Mutt

I have disconnected my mechanical gauge from the pyro and have the plugged in the Adrenaline. It seems to be working correctly with that probe. It was a direct connection. Do I have to use the probe that was sent out? I have had the egts go high enough to defuel and the PLs will flash and work their way down as I get hotter and hotter. To get this blinking, I just have to go down my block and it will start flashing. I will still have power too. If it is a pyro problem, it does not seem to affect anything but the display. I will try a tune without the defueling and let you know how that works out.

Thanks

hink

Installed updated tune 1009 today. No flashing of PL's, High Idle worked fine, TT worked fine. No issues here.

Haulin Mutt

I just tested 2011. Works as advertised. No flashing, warm up worked, high idle worked, and TT worked. You must have been able to activate the brake turn off on the 01's? I am going to try another one with defueling.

Haulin Mutt

Tried 2012. It must be something with the EGTs. Quick burst in 2nd had the PLs flashing. With that little burst would only read 525 so something is up.

RowJ

I do ...as already stated in post 1450.
High idle only works after fully warmed up and when I stop somewhere and leave it running. Goes to high Idle after 3 min (not two)??

RJ

hink

Hmm, my truck was already warmed up when I tried the 1009 tune, but it went into high idle after 2 minutes with the pod set on PL00. I will try it later with the motor cold.

whitediesel

Not everyone. I seem to have the same flashing issue, however it is only on the tunes with egt defueling. I thought mabey i had a loose connection