EBunger

Tried but wouldnt send sorry. Failure notice

xtoyz17

Rowland,

You can get 3.5 straight from the Microsoft site, so no need to try and find it elsewhere. I only got it to install on my girlfriends laptop though, wouldn't take to either of my towers in my house

bsp

There is a link to the 3.5 in the beta download section of Quad's site that takes you right to it...........Brad

ahire

He said he has NET v3.5

EBunger

Its a winrar cp210 driver that I needed. The Framework doesnt apply to the Pulse.

olwhitey

i heard somewhere that you can download the different files to your computer and just save them on there. i was wonderin how to do this so i can take my computer with me where i have no internet and put a different file on my box. thanks

xtoyz17

Save the files from the site on your laptopl, and just update the box with whatever one you want. No way to do it without a computer/laptop though.

ahire

Thats what i done. I just made a folder on my laptop and downloaded the files i wanted off Quads website and saved them to my ADR folder and i can change them on the road if i feel the need.

When you download the off the website it should ask if you want to save them or run them. Just save them and put them on your desktop or in a folder you make.

rob24vctd

What happened to the fp senders on quads site??? are they working and are they still available??

braxton357

Ok, I've got the same question pretty much. My adr is 3 weeks old, before installing it I tried to update the pulse. Says "no commander found" and now the pulse just has a blank screen. Buttons still beep but that's it. Any help?

xtoyz17

I'd try updating it again to see if it fixes it. If your computer won't do it, borrom someones. A lot of times I've fixed little quirks by reloading the software.

gotslicks

question
what would be better for towing enclosed 9k for best milage?
milage master/1 of 10 tune?
what is a good tow tune download still looking for fuel economy?
i feel i use way more throttle on milage setting compared to 2 and up?

RowJ

Yup! Reloading the Pulse software will often solve the problem. Twice in last 2 months I have lost the IAT readout. Reloaded v1.2.8 and it was back!
Still can't get Pulse to take v1.2.9?

For anyone interested, I dynoed the Comp tune this weekend (not Comp1). Did 25 hp less that ADR 2000 (in my signature)....and got bad popping at 3200 rpm?? Wanted to try Dyno tune or go back to ADR2000 and dyno again but too many trucks showed up to run a second time.

RJ

J Double

Same dyno you rolled on last time? To bad you couldn't have did another run with the 2K tune just to get a new baseline. I've lost as much as 25hp on different days on the same dyno.

RowJ

Same Dyno....and # corrected for STP...but anything is possible.
Just did not care for the way the Comp tune spooled up. Could be my big injectors but it felt like it bogged down, with hellacious amount of smoke. And the popping is not nice!

RJ