quad adr/pulse
#17
#19
Registered User
Thread Starter
Join Date: Dec 2008
Location: aberdeen
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Ok same prob again i had it on the level 5 and hit the accel bout 3/4 the way down and let off pretty fast and what do ya no the truck shut down again. so can some one help is there any settings i have to tweek to make it stop doing this or what updates do i need. just put it in yesterday. Love the power but then it just stops after i let off the accelorater.
#21
Registered User
Try it without letting off the power so quickly.
This dying engine occurs at the drag strip sometimes. May be nothing to do with the Adrenaline. Seems not to happen if your tank is near full! My guess is your below 1/2 tank?
RJ
This dying engine occurs at the drag strip sometimes. May be nothing to do with the Adrenaline. Seems not to happen if your tank is near full! My guess is your below 1/2 tank?
RJ
#23
Registered User
Like I said...below 1/2. I use to race with just below 1/2 tank and would kill the engine if coming off the throttle too quickly. Just another possibility?
RJ
RJ
#25
Registered User
Dangerous question to ask around here. About the same as asking which engine oil is best.
I love my DTT. Been bullet proof for over 100,000 miles. But you need to research what's best for you.
I would stay with the top 3 or 4 .... DTT.... Goerand Bros..... Suncoast.... and HTS.
Good luck!
RJ
I love my DTT. Been bullet proof for over 100,000 miles. But you need to research what's best for you.
I would stay with the top 3 or 4 .... DTT.... Goerand Bros..... Suncoast.... and HTS.
Good luck!
RJ
#28
Chapter President
Yes it will run the LP for a second, I always unplug my AD before updating. I just leave the Pulse plugged in when updating it.
Did you get the latest updates & update the Pulse too?
Did you get the latest updates & update the Pulse too?
#29
Registered User
Thread Starter
Join Date: Dec 2008
Location: aberdeen
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
ok well when i unplugged the ad n hooked up the computer it didnt reconize it being hooked up. im going to get all the updates done to day hopefully
Thread
Thread Starter
Forum
Replies
Last Post
quads4_life
Performance and Accessories 2nd gen only
3
04-15-2010 12:15 PM
quads4_life
Performance and Accessories 2nd gen only
8
11-29-2008 02:18 PM
dieselguy71
Performance and Accessories 2nd gen only
4
04-24-2008 02:09 PM