Proven 500+hp combos for H.O.'s ??????
#61
DTR Advertiser
Originally Posted by BigBlue
My roommate finally got on a dyno and laid down 402hp. Dyno wasn't picking up torque that night. For what it's worth, we did a dyno on both his truck and mine with a standard and then a drag comp and peak power was the same on both trucks but there was an additional 40hp after 2700rpm on both trucks.
#62
DTR Advertiser
Originally Posted by CTD_Neil
Ok, looking at my sig, what do I NEED to make 500+ hp? I'm guessing my turbo will need to be upgraded to a 64/14 right? What injectors? anything else? Thanks
You have some choices on fuel:
1) The HRVP44 with the injectors you have should do 500 or real close.
2) M4.5's and keep the pump you have will make 500. Ultra driveable!
3) M4 or 4.5 and the HRVP44 and you will make 565-580. No Joke. I had a customer make 604HP with a HRVP44 and M4's. He had a PS66 turbo.
If you want to keep the turbo you have, the HRVP44 with M5's will crack 530 with ease, but will run hot on high box settings.
#63
Originally Posted by Don M
Tyler, what turbo did he get? 402 is pretty good for Mach 1.5's and a COMP on yukky winter fuel.
#67
Banned
Join Date: Jan 2005
Location: Baltimore, MD
Posts: 2,997
Likes: 0
Received 0 Likes
on
0 Posts
well i have a adkins lil 55 headed my way very soon, and my comp will be getting upgraded to a drag version by the end of the month.
im also preparing to swap out my injectors for some 150hp units so i should be just shy of 500hp by the time the spring dyno day rolls around for the MDTDC...gonna be a fun day for sure.
im also preparing to swap out my injectors for some 150hp units so i should be just shy of 500hp by the time the spring dyno day rolls around for the MDTDC...gonna be a fun day for sure.
#68
Registered User
Thread Starter
Join Date: Nov 2003
Location: St.Helena, CA.
Posts: 839
Likes: 0
Received 0 Likes
on
0 Posts
Read through this one again and noticed a few of you were waiting to dyno again, anybody have recent dyno results? Looks like i'll be going with injectors from DonM in the Mach 4.5-4.9 range. I still need to talk to him about it though. I would like to crack 500hp without getting a HRVP44. Dyno days are coming up around here, gotta get movin! I need to find 66 horsepower to get there!
#69
Registered User
Join Date: Aug 2005
Location: WA State
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
I still haven't made it back to re-dyno (?). Just been busy with other projects and when my time was open, the dyno wasn't.....figures. I will post as soon as I can get it done.