plan and material list for 7" stack crossbox
#1
Registered User
Thread Starter
Join Date: Jan 2004
Location: Blowing Rock,NC
Posts: 1,143
Likes: 0
Received 0 Likes
on
0 Posts
plan and material list for 7" stack crossbox
hey yall!
I was wondering if anyone had eaither of these at hand , i was wanting somthing i could just take to the welding shop and have them make it up for me! I would really appreciate any help!
Thanks
I was wondering if anyone had eaither of these at hand , i was wanting somthing i could just take to the welding shop and have them make it up for me! I would really appreciate any help!
Thanks
#2
Registered User
Join Date: Jan 2006
Location: Crooksville Ohio
Posts: 383
Likes: 0
Received 0 Likes
on
0 Posts
Hey Hey,
I am buiding a stack box design for my future stacks. Do you have a flatbed?
My box measures 3 inches tall by 8 inches wide and roughly 8ft long. I used 1/8 inch thick steel diamond plate type. I also did all of my welding and cutting on my own. very simple and hopefully effective design.
I cut a 3 inch hole in the bottom of my flatbed(for the exhuast to inter) Making sure to put everything in the exact center so I would get even smoke out of both stacks. Need any more info or facts let me know. More than gladly to help you.
Wheelo
I am buiding a stack box design for my future stacks. Do you have a flatbed?
My box measures 3 inches tall by 8 inches wide and roughly 8ft long. I used 1/8 inch thick steel diamond plate type. I also did all of my welding and cutting on my own. very simple and hopefully effective design.
I cut a 3 inch hole in the bottom of my flatbed(for the exhuast to inter) Making sure to put everything in the exact center so I would get even smoke out of both stacks. Need any more info or facts let me know. More than gladly to help you.
Wheelo
#3
Registered User
Thread Starter
Join Date: Jan 2004
Location: Blowing Rock,NC
Posts: 1,143
Likes: 0
Received 0 Likes
on
0 Posts
nope ive got a 2500 with a reg bed. Im going with a 4 inch input as well!
Thanks for the input if you have a drawing or somthing that would be great if not i understand!
thanks
Thanks for the input if you have a drawing or somthing that would be great if not i understand!
thanks
Thread
Thread Starter
Forum
Replies
Last Post
PEAKSTRYDE
Suggestions, Comments and Site Questions
1
10-11-2007 04:20 PM
Badd Dogg Guy19
3rd Generation Ram - Non Drivetrain - All Years
14
04-14-2005 09:04 PM