Peirs Cam
#1
Registered User
Thread Starter
Join Date: Jan 2003
Location: Sugarland,College Station, Mason, TX
Posts: 1,113
Likes: 0
Received 0 Likes
on
0 Posts
Peirs Cam
Good and bad about it...Basicly just a aftermarket cam in general...Worth the money or no? power? etc?
Thanks
SjLingenfelter
Thanks
SjLingenfelter
#3
Registered User
Join Date: Jan 2002
Location: Southern, Indiana
Posts: 5,352
Likes: 0
Received 0 Likes
on
0 Posts
It offers quicker spool-up with bigger turbo's, lower egt's.
Really the Cam's are not meant to raise peak power. Your power band will usually start lower.
Scheid diesel also offers a selection of Cam's. I run one in my 04.5
www.scheiddiesel.com
Really the Cam's are not meant to raise peak power. Your power band will usually start lower.
Scheid diesel also offers a selection of Cam's. I run one in my 04.5
www.scheiddiesel.com
#5
Registered User
Join Date: Jan 2003
Location: Used to be missoula, montana: Now in Sonoma County California
Posts: 1,198
Likes: 0
Received 2 Likes
on
2 Posts
Piers and mark both talked me out of it. but at the time i was only talking an ht2b 370's on a 215 pump he said the gains would be marginal for the cost and in my towing application. i still think about it though
#6
There has been lots of talk about cams, but I have never seen specifics... How about numbers???? Duration at .050", rec. centerline, lobe separation, and lift for stock and these guys' bumpsticks....
KP
KP
Trending Topics
#9
Registered User
Join Date: Jan 2003
Location: Used to be missoula, montana: Now in Sonoma County California
Posts: 1,198
Likes: 0
Received 2 Likes
on
2 Posts
Lets take a trip back in time
https://www.dieseltruckresource.com/...ight=camshafts
https://www.dieseltruckresource.com/...ight=camshafts
Dons last post here is pretty good
https://www.dieseltruckresource.com/...s&pagenumber=2
https://www.dieseltruckresource.com/...ight=camshafts
https://www.dieseltruckresource.com/...ight=camshafts
https://www.dieseltruckresource.com/...ight=camshafts
Dons last post here is pretty good
https://www.dieseltruckresource.com/...s&pagenumber=2
https://www.dieseltruckresource.com/...ight=camshafts
Thread
Thread Starter
Forum
Replies
Last Post
etn550
3rd Gen Engine and Drivetrain -> 2003-2007
4
04-01-2010 12:12 PM
Trashdawg5050
3rd Gen High Performance and Accessories (5.9L Only)
9
10-04-2004 08:39 PM