Would anyone here be able to give me a parts list on the fittings i will need to install an adjustable bypass in between the filter housing and the VP, I currently have a walbro 392 with the standard bypass mounted down on the frame rail about 6" from the pump, I will also need to remove that bypass and put a barb fitting there, but I need to know where I can get the fittings to make the big line kit, ps-a web address where I can get it all would be nice too. Thanks in advance

 

Give Eric at Vulcanperformance.com a call. He's going to have everything you need. When I called him I got the simflo regulator and all the fittings shipped to my door for around $70.

T joint
3 pushlock fittings
fuel line

 

I listed quite a few parts I used in my 3/8" fuel system in the post in my signature. Although it is not exactly what you are looking for, you may find something useful there.
-P

 

what size fittings are the VP inlet and FF outlet? are they npt threads. Thanks

 

So can anybody tell me what the thread size/type is for the vp inlet fitting and ff outlet fitting?

 

Refer to post #2. http://www.vulcanperformance.com/servlet/StoreFront

 

The thread size is 12mm X 1.5

I would alos recommend calling Eric at Vulcan!!

Dave

 

Correct, the threads are metric 12x1.5. If you are looking for them to build your own setup, MSC Industrial has NPT adapters: Part # 04254371 1/4NPT X M12 METRIC ISO ADAPTER $4.88.
-P