OK guys, riddle me THIS - injectors...
#18
Top's Younger Twin
Re:OK guys, riddle me THIS - injectors...
[quote author=Don M link=board=7;threadid=13634;start=0#128608 date=1050502060]<br>The 215 injector is more money because the initial cost from Bosch is higher. Much higher. Bosch has decided the 215 injector is worth more money than the 370 Marine for the 12 valve <br><br>For an extrude honed injector the the production time is higher the larger the power level goes. More media needs to be used to hone it out and the honing time increases. Time is money. Labor is not cheap. Adding to this, the parts for many of the high HP injectors just plain cost more money.<br><br>EDM injectors are the most labor intense of them all. Many hours are spent making the holes and the more holes you gotta make the higher the labor cost is. Adding to this, our set-up time to just get the fixturing on the machine and dial indicated in, takes more time than extrude honing an entire set does. Back to "time is money".<br><br>Don~<br><br><br><br>[/quote]<br><br>Don I thought your smokey go nowhere no power injectors all smokers were modified MOEN shower heads?<br><br>
#19
Administrator
Re:OK guys, riddle me THIS - injectors...
<br><br>Don I thought your smokey go nowhere no power injectors all smokers were modified MOEN shower heads?<br><br> <br>
#20
Registered User
Join Date: Jan 2003
Location: Silver City NM
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
Re:OK guys, riddle me THIS - injectors...
Scotty, You may be right on the Money... I bet all he does is remove the "California" 2.5 gpm water restricter. I buy his inj's because he only uses the 100% Brass Body shower Heads.... No plastic injectors going into my truck! : > ;D
I bet the "Added Cost" is really the Pizza and Beer consumed while Talking about how much power these are going to make! :-X :-*
Don? Are the new 48 Hole Porcupine line inj's ready yet??? 8)
I bet the "Added Cost" is really the Pizza and Beer consumed while Talking about how much power these are going to make! :-X :-*
Don? Are the new 48 Hole Porcupine line inj's ready yet??? 8)
Thread
Thread Starter
Forum
Replies
Last Post