No to BHAF
#1
Registered User
Thread Starter
No to BHAF
FYI
The results are posted from our Dyno day at Abacus racing in VA Beach. On the second run I posted 189.7 hp and 489.8 torque. For the third run I pulled the stock air filter at the turbo and posted the exact same torque and gained only one half of a horse power. EGT's stayed at 1200. I think I will wait until the next upgrades before I spring for a BHAF, or at least until the stock filter is to dirty to run any more.
The results are posted from our Dyno day at Abacus racing in VA Beach. On the second run I posted 189.7 hp and 489.8 torque. For the third run I pulled the stock air filter at the turbo and posted the exact same torque and gained only one half of a horse power. EGT's stayed at 1200. I think I will wait until the next upgrades before I spring for a BHAF, or at least until the stock filter is to dirty to run any more.
#2
Adminstrator-ess
I think your EGT under a sustained load would be better with the BHAF. I'm not surprised that you didn't gain any HP, though. Fuel = HP, air = useable HP.
#4
Registered User
Join Date: Dec 2003
Location: Minnesota
Posts: 896
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Boatnik
FYI
The results are posted from our Dyno day at Abacus racing in VA Beach. On the second run I posted 189.7 hp and 489.8 torque. For the third run I pulled the stock air filter at the turbo and posted the exact same torque and gained only one half of a horse power. EGT's stayed at 1200. I think I will wait until the next upgrades before I spring for a BHAF, or at least until the stock filter is to dirty to run any more.
The results are posted from our Dyno day at Abacus racing in VA Beach. On the second run I posted 189.7 hp and 489.8 torque. For the third run I pulled the stock air filter at the turbo and posted the exact same torque and gained only one half of a horse power. EGT's stayed at 1200. I think I will wait until the next upgrades before I spring for a BHAF, or at least until the stock filter is to dirty to run any more.
maybe hot air from the radiator was blasting straight into the turbo and therefore if you had a BHAF in the corner/fender grabbing cooler air you may not have been robbed of any HP's...just thinking out loud after a long day of work.
but i will go with wannadiesel on this one, no more fuel = no more HP's for the amount of fuel you are moving...
#6
Top's Younger Twin
Real world driving plays a big roll in how any aftermarket air intake performs compared to a static dyno run.
Hohn makes a very valid point...the power level negates the benefits of any kind of change to the air intake...especially on the rollers.
Scotty
Hohn makes a very valid point...the power level negates the benefits of any kind of change to the air intake...especially on the rollers.
Scotty
#7
Registered User
One thing I was thinking bout after you did it boatnik, is airflow.
When the air tube is on, it directs the air straight in to the turbo. when it is off, it is not being fed to the turbo in a straight line. You will not flow as much air.
you should have left the tube on, and disconnected it at the filter.
it's kinda hard to explain but what gives more pressure and flow....a water hose nozzle that is set for a solid stream, or one that gives a spray ??
many flow bench pulls have shown me that the air can not be expected to just go in the hole. you need something to direct it. I can flow a head and get xxx cfm for flow. if I put some clay, or a flow radius on the intake runner, the air doesn't have to make the 90 deg turn into the runner now, it is gradually turned. it will flow more air. Same thing with an exhaust port. it will flow more air with a short piece of pipe on it than it will with the exhaust port.
Like I said, it's hard to explain, but in your test, the air flow was not only going into the turbo from straight ahead, but from the sides (90 deg) also, and the air coming from the sides will cause more turbulence and therefore less flow into the turbo.
Maybe this is a better example:
What flows better, 2 lanes of traffic, or 4 lanes merging into 2 ? The 2 lanes will skip right along, but the 4 into 2 will have to slow a lot to allow the extra 2 lanes to merge in.
the same basic effect is what I am talking about.
When the air tube is on, it directs the air straight in to the turbo. when it is off, it is not being fed to the turbo in a straight line. You will not flow as much air.
you should have left the tube on, and disconnected it at the filter.
it's kinda hard to explain but what gives more pressure and flow....a water hose nozzle that is set for a solid stream, or one that gives a spray ??
many flow bench pulls have shown me that the air can not be expected to just go in the hole. you need something to direct it. I can flow a head and get xxx cfm for flow. if I put some clay, or a flow radius on the intake runner, the air doesn't have to make the 90 deg turn into the runner now, it is gradually turned. it will flow more air. Same thing with an exhaust port. it will flow more air with a short piece of pipe on it than it will with the exhaust port.
Like I said, it's hard to explain, but in your test, the air flow was not only going into the turbo from straight ahead, but from the sides (90 deg) also, and the air coming from the sides will cause more turbulence and therefore less flow into the turbo.
Maybe this is a better example:
What flows better, 2 lanes of traffic, or 4 lanes merging into 2 ? The 2 lanes will skip right along, but the 4 into 2 will have to slow a lot to allow the extra 2 lanes to merge in.
the same basic effect is what I am talking about.
Trending Topics
#8
Registered User
Thread Starter
Originally Posted by pgilles
you dyno'ed without any sort of air filter? risky.
maybe hot air from the radiator was blasting straight into the turbo and therefore if you had a BHAF in the corner/fender grabbing cooler air you may not have been robbed of any HP's...just thinking out loud after a long day of work.
but i will go with wannadiesel on this one, no more fuel = no more HP's for the amount of fuel you are moving...
maybe hot air from the radiator was blasting straight into the turbo and therefore if you had a BHAF in the corner/fender grabbing cooler air you may not have been robbed of any HP's...just thinking out loud after a long day of work.
but i will go with wannadiesel on this one, no more fuel = no more HP's for the amount of fuel you are moving...
#9
Registered User
Thread Starter
Originally Posted by TRCM
One thing I was thinking bout after you did it boatnik, is airflow.
When the air tube is on, it directs the air straight in to the turbo. when it is off, it is not being fed to the turbo in a straight line. You will not flow as much air.
you should have left the tube on, and disconnected it at the filter.
it's kinda hard to explain but what gives more pressure and flow....a water hose nozzle that is set for a solid stream, or one that gives a spray ??
many flow bench pulls have shown me that the air can not be expected to just go in the hole. you need something to direct it. I can flow a head and get xxx cfm for flow. if I put some clay, or a flow radius on the intake runner, the air doesn't have to make the 90 deg turn into the runner now, it is gradually turned. it will flow more air. Same thing with an exhaust port. it will flow more air with a short piece of pipe on it than it will with the exhaust port.
Like I said, it's hard to explain, but in your test, the air flow was not only going into the turbo from straight ahead, but from the sides (90 deg) also, and the air coming from the sides will cause more turbulence and therefore less flow into the turbo.
Maybe this is a better example:
What flows better, 2 lanes of traffic, or 4 lanes merging into 2 ? The 2 lanes will skip right along, but the 4 into 2 will have to slow a lot to allow the extra 2 lanes to merge in.
the same basic effect is what I am talking about.
When the air tube is on, it directs the air straight in to the turbo. when it is off, it is not being fed to the turbo in a straight line. You will not flow as much air.
you should have left the tube on, and disconnected it at the filter.
it's kinda hard to explain but what gives more pressure and flow....a water hose nozzle that is set for a solid stream, or one that gives a spray ??
many flow bench pulls have shown me that the air can not be expected to just go in the hole. you need something to direct it. I can flow a head and get xxx cfm for flow. if I put some clay, or a flow radius on the intake runner, the air doesn't have to make the 90 deg turn into the runner now, it is gradually turned. it will flow more air. Same thing with an exhaust port. it will flow more air with a short piece of pipe on it than it will with the exhaust port.
Like I said, it's hard to explain, but in your test, the air flow was not only going into the turbo from straight ahead, but from the sides (90 deg) also, and the air coming from the sides will cause more turbulence and therefore less flow into the turbo.
Maybe this is a better example:
What flows better, 2 lanes of traffic, or 4 lanes merging into 2 ? The 2 lanes will skip right along, but the 4 into 2 will have to slow a lot to allow the extra 2 lanes to merge in.
the same basic effect is what I am talking about.
I have modified the inlet to the turbo slightly to reduced the turbulant air caused buy the sharp corner left at the factory opening. It is now smooth and radiused similar to a jet engine cowl. When I get a chance I will post a picture so you can see what I did.
#10
Registered User
Join Date: Apr 2004
Location: New Meadows, Idaho
Posts: 2,148
Likes: 0
Received 0 Likes
on
0 Posts
With all the corrigation in the stock air hose bellows I don,t see it helping much.
#13
Registered User
Thread Starter
Originally Posted by Mopar1973man
Opps... I learned something new today...
Now will a 2nd Gen tube fit??? Dumb Idea...
Now will a 2nd Gen tube fit??? Dumb Idea...
#14
Registered User
Join Date: Dec 2003
Location: Minnesota
Posts: 896
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Boatnik
I haven't given it much thought but I know where a few are and I will find out for certain. THe first gens air filter are mounted behind the head light and I believe the seconds are back by the hinge. If the tube will straighten it might fit. Of course with a little ingenuity and a couple 45 degree elbows???????