EBunger

That would be an hx35 cover then wouldnt it?

Clunk

Nope, many HX40's are 57-58mm. I think the new HX40 Pro is 60mm but I don't know if the inlet radius will work with the BW wheel.

Clunk

Which exhaust turbine is on your SPS62?

EBunger

It is the 71mm/14cm .80

Clunk

I'm finishing up a S300G071 w/65mm/.70 for mine. It's a CAT piece w/61mm compressor and really-really needs to spool quick since I have a clutch pedal hanging down/ gotta re-spool on every shift.
What do you think the cm would be with a .70A/R ?

EBunger

It would be a 12cm according to my old Phat shaft 62 specs which II called the 62/70

scottsjeeprolet

So i'm gonna keep it. Crazydog told me i can have my 35 housing machined to fit the 40 wheel. Who knows what has to be done? Or does anyone have a 40 housing for sale?
I am also gonna have an HX40 with an 18cm exhaust for sale.

Clunk

You might ask Crazydog where to get your housing machined. The BW wheel is quite a bit taller than the HX35 wheel.
You shouldn't have any problem getting rid of your HX40, they sell like crazy on eBay.

Clunk

Thanks, I port matched my 14cm to my exhaust manifold and now my S300G is port matched to the exhaust manifold. I also did alot of blending & smoothing. Should be interesting. Left the CAT pipe flange alone and bell-mouthed the downpipe too.
I hope I'll have a coupla days to finish it next week.

scottsjeeprolet

Well i just got the HX40 and the compressor wheel has the clipping just like the 35/40. Now just gotta get a compressor cover.

Here's the HX40, i'm just gonna sell it because the exhaust housing is too big @ 18cm. I'm sure someone will want it on Ebay.

Clunk

Check the diameter across 2 of the fins at the inducer end of the HX40 comp. wheel with your calipers and see if you get 2.359"