hotdram

Great article on something I plan on doing to my truck when I get the $$$. Thanks for the heads up on how to avoid diesel showers.
I just can't get the link that says "here" for instructions to work.

Rob

Scotty

Several folks were giving me hassles on here about no install instructions...maybe that is not a link but yet another jab at poor widdo wee me. :'(

:'(

Well written article and factual too. Gotta have the facts. ;D

And once again I was told my product promotion line would probably not be in good taste but heres what I thought of anyway...

The Scotty Fuel System that SUCKS... COOoooOooooOoooL FUEL

StakeMan

That is the link the Rod gave me for the directions. :

Lary Ellis (Top)

This is the proper link for the instructions

http://www.wildcatdiesel.com/wildcat...uel_system.htm

hotdram

Thanks for the link Top (and Rod).
Stakeman, how long did this take you to accomplish?

StakeMan

It took me a couple of hours but I was doing other things at the same time.

Scotty

Gee, all the flack I was taking and theres the install instructions I provided to Rod and its obvious he did not proof it like he said he would. The boy is slippin' as he usually rips and critiques all of my efforts.

Glad it turned out like it did. 2 hrs is a nice pace for the install.

Push Rod

[quote author=Scotty link=board=7;threadid=18401;start=0#msg172803 date=1060920949]
The boy is slippin' as he usually rips and critiques all of my efforts.
[/quote]

Don't worry, I've been telling every single customer that buys the systems that your install instructions stink

Good article, Charles. I am surprised by the pressure increase at your power level though. We're recommending this system for 400 HP and down guys, when using the factory lift pump, and for 400 HP+ guys, we're thinking that the Maximum Flow system in concert with a better lift pump will give everyone a reliable fuel system for whatever horsepower level you need to run.

Scotty

[quote author=Push Rod link=board=7;threadid=18401;start=0#msg172901 date=1060955405]
[quote author=Scotty link=board=7;threadid=18401;start=0#msg172803 date=1060920949]
The boy is slippin' as he usually rips and critiques all of my efforts.
[/quote]

in concert with a better lift pump will give everyone a reliable fuel system for whatever horsepower level you need to run.
[/quote]

LOL

Geez, what do you know about a concert up there in the trees and the sheep? :

RATTLINRAM

Well,,,,,,,,,,, I think I got the best deal! ;D
I won my kit as a door prize at the Claremont Diesel Round-Up and Scotty was there to steer me towards choosing the kit. (Thanks Scotty) That kit had no instructions,,,,,, (Scotty blamed Rod for that),,,,, so I had Rod give me the URL for the directions and then the pictures didn't show up,,,,, (he blamed that on Scotty)!
Anyway,,,,,, I went over to DD4x4's (Joel) and we put them on. Joel did most of the "grunt, cuss and stand on your head work" and I would take over when Joel's face would turn red. : ,,,,,, Oh yeah,,,,,,, I got to do the "Lay under the truck and take a Diesel Shower" part when it came time to make the connection to the hard line going to the tank. But,,, I only took 1 (one) "Diesel Shower" Stake! (you must be a slow learner!)
After all was done,,, I have seen an increase in idle pressure by 1 psi and my pressure doesn't drop below 12 at WOT. This is with a new lift pump and completely stock truck. I have no doubt that this is bound to help the lift pump live a little longer and I should have NO problems when I decide to add a little more horsepower in the future. This set-up is much better than the banjo fittings and it looks COOL too! ;D

WHIFF

[quote author=StakeMan link=board=7;threadid=18401;start=0#msg172759 date=1060913871]
It took me a couple of hours but I was doing other things at the same time.
[/quote]

...Like taking showers, from the sounds of it!

StakeMan

Not slow. Just impatient.

Shovelhead

Nice write-up Stake.