need studs with nitrous?
11-05-2007, 09:10 PM
#1
Registered User
Thread Starter
Join Date: Apr 2007
Location: Rapid City SD
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
need studs with nitrous?
My dad is going with a nitrous kit and he is wondering if studding the head is nessesary. I said that it is and he doesn't. Please give me some insite on the topic.
11-05-2007, 10:38 PM
#2
Registered User
What kind of truck does he have? Year, mods, etc. A stock truck could hand a 20HP shot of nitrous no problem. A truck on the edge with stock head and studs could not handle 20HP shot of nitrous. No stock truck could handle a 200 HP shot! So lots of variables, if you give members the whole picture, you will get better feedback.
11-12-2007, 10:48 PM
#4
Registered User
Yeah, he will need studs, in fact, I can't believe his head does leak as it is. Does he thrash on it much?
My old man never hot rods, he could run nos, meth, twins, and Mach 8's with a stock head and a stock tranny!
My old man never hot rods, he could run nos, meth, twins, and Mach 8's with a stock head and a stock tranny!
11-18-2007, 06:48 PM
#7
Registered User
Thread Starter
Join Date: Apr 2007
Location: Rapid City SD
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
My old man is worse than i am! He cant drive it without smokin someone out. His Liscense plate says "SMOKINU"....HEHE I think i am goin to talk dad into a cosmetic hg and get him to stay away from cuttin up his head and block. he just wants the nitrous to get the edge over a certain person at our next local dyno days. Dads pickup is in Diesel Power Mag (december 2007) pg. 138 and 143. His name is mark.
Trending Topics
11-18-2007, 06:50 PM
#8
Registered User
Join Date: Apr 2002
Location: Hershey, PA
Posts: 1,250
Likes: 0
Received 0 Likes
on
0 Posts
My old man is worse than i am! He cant drive it without smokin someone out. His Liscense plate says "SMOKINU"....HEHE I think i am goin to talk dad into a cosmetic hg and get him to stay away from cuttin up his head and block. he just wants the nitrous to get the edge over a certain person at our next local dyno days. Dads pickup is in Diesel Power Mag (december 2007) pg. 138 and 143. His name is mark.
11-18-2007, 07:04 PM
#9
Registered User
Thread Starter
Join Date: Apr 2007
Location: Rapid City SD
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
11-18-2007, 07:17 PM
#12
Registered User
Join Date: Apr 2002
Location: Hershey, PA
Posts: 1,250
Likes: 0
Received 0 Likes
on
0 Posts
Justin,
I wish I knew..... The guys I have talked with told me how they prepped the surface and installed the gasket and it all sounded good.
On another note did you see the article in the TDR mag on replacing a II PS62 with a garrett GT37 from Turbo re-source? Pretty interesting, picked up HP and TQ, also hit peak number 200-400 rpm lower! Egt's were down 100* for the same run and higher HP. The turbo is pretty much a direct bolt up except for the H2O lines.
Doug
I wish I knew..... The guys I have talked with told me how they prepped the surface and installed the gasket and it all sounded good.
On another note did you see the article in the TDR mag on replacing a II PS62 with a garrett GT37 from Turbo re-source? Pretty interesting, picked up HP and TQ, also hit peak number 200-400 rpm lower! Egt's were down 100* for the same run and higher HP. The turbo is pretty much a direct bolt up except for the H2O lines.
Doug
11-18-2007, 07:19 PM
#13
Registered User
Thread Starter
Join Date: Apr 2007
Location: Rapid City SD
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
11-18-2007, 10:45 PM
#14
Registered User
Join Date: Aug 2005
Location: fredericksburg, virginia
Posts: 3,465
Likes: 0
Received 0 Likes
on
0 Posts
Justin,
I wish I knew..... The guys I have talked with told me how they prepped the surface and installed the gasket and it all sounded good.
On another note did you see the article in the TDR mag on replacing a II PS62 with a garrett GT37 from Turbo re-source? Pretty interesting, picked up HP and TQ, also hit peak number 200-400 rpm lower! Egt's were down 100* for the same run and higher HP. The turbo is pretty much a direct bolt up except for the H2O lines.
Doug
I wish I knew..... The guys I have talked with told me how they prepped the surface and installed the gasket and it all sounded good.
On another note did you see the article in the TDR mag on replacing a II PS62 with a garrett GT37 from Turbo re-source? Pretty interesting, picked up HP and TQ, also hit peak number 200-400 rpm lower! Egt's were down 100* for the same run and higher HP. The turbo is pretty much a direct bolt up except for the H2O lines.
Doug
