Need some info on s300 turbo
#1
Registered User
Thread Starter
Join Date: Dec 2006
Location: Rossland, British Columbia
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
Need some info on s300 turbo
I found an s300 for a good price but i just need to know what sort of downpipe i will need and if are s300 turbos are the same? Are there different housing sizes and will it fit on my exhaust manifold? I'm not sure if there are a whole bunch of s300 variants and i need to be careful which one or what size i get?
What questions do i need to ask the seller about the turbo?
Thanks guys.
What questions do i need to ask the seller about the turbo?
Thanks guys.
#2
Registered User
It depends on where the turbo is from, if its for a truck application it may fit, but off of a John Deere it won't, if thats what you were thinking. They come in all different sizes as far as A/R and flanges go, even the center sections can be different, or at least have different size bearings in them. Look for a BD Super B turbo, others won't last as long with the smaller bearings, ask for a part number, then call or email HTT, Piers, or BD and see what they have to say about it.
#3
Registered User
Thread Starter
Join Date: Dec 2006
Location: Rossland, British Columbia
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
It depends on where the turbo is from, if its for a truck application it may fit, but off of a John Deere it won't, if thats what you were thinking. They come in all different sizes as far as A/R and flanges go, even the center sections can be different, or at least have different size bearings in them. Look for a BD Super B turbo, others won't last as long with the smaller bearings, ask for a part number, then call or email HTT, Piers, or BD and see what they have to say about it.
Thread
Thread Starter
Forum
Replies
Last Post
Mini_Donkeys
Performance and Accessories 2nd gen only
4
04-19-2007 12:21 PM
05SilverBULLET
3rd Gen High Performance and Accessories (5.9L Only)
5
11-05-2006 05:23 PM