cstmfabman

Does anyone have pics of the dash without the plastic trim piece in place? you know, the piece that can be replaced with the wood grain. I am interested to see what it looks like underneath, I am considering building a custom 4 gauge pod that sits almost flush with the top of the dash, just above the center AC vents. Thanks for any help!

SmokeyBear

I will try and take one tonight if noone posts up

blackdiesel

hop in your truck and tug on it a little, they pop right off

cstmfabman

Really? No tools needed?

BigBlue

Yup. It pulls straight off.

blackdiesel

yeah i had mine off multiple times when i was trying to figure out how why my radio didnt work .

just be careful, dont crack it

cstmfabman

OK, will give it a try tomorrow. Thanks!

Shovelhead

Set the parking brake and put the gear selector in 1st gear (with the engine off, of course) to make it easier to get the trim all the way off.

hotdram

Just a note, not all 2nd gens pull right off (if I remember correctly). On the earlier ones with the cup holders mounted up high, you have to take 2 screws out that hold the cup holder in place. Still a very easy job.

~Rob

Shovelhead

His sig shows a 2002
Good point for the early model years guys though.

dssimecek

In my younger days a naked dash was called "streaking"

H2SRDMB

man you beat me too it.. that and i was going to post someone streaking owell !! cant win them all

CSAGrey1

DOn't you have to pull the screw that is located behind the little door for the cig lighter? Or am I missing something?