My Egt's Are Way Too Low I Think........
#16
Yeah I would install it as per these instructions...
http://piersdiesel.com/TechPyroInstall.htm
I reinstalled a pyro for a friend that a dumb dumb at a shop put in the center divider and then angled it into the front half. It read about the same as being in the right place but didn't rise as fast and leaked diesel funes badly.
My truck normally idles at 225-250 and I cruise at 69mph at like 650 and 5-6psi boost, but I have a very ported out head...
http://piersdiesel.com/TechPyroInstall.htm
I reinstalled a pyro for a friend that a dumb dumb at a shop put in the center divider and then angled it into the front half. It read about the same as being in the right place but didn't rise as fast and leaked diesel funes badly.
My truck normally idles at 225-250 and I cruise at 69mph at like 650 and 5-6psi boost, but I have a very ported out head...
#17
Registered User
Join Date: Jun 2007
Location: Redding, California
Posts: 296
Likes: 0
Received 0 Likes
on
0 Posts
Those are good instructions. I just followed the Quadzilla commander instructions and from what i understand thats where they said to put it. AND they say you can tap into the manifold while engine running and it would blow out all shavings. That was 4k miles ago. no problems
Thread
Thread Starter
Forum
Replies
Last Post
tinknocker827
24 Valve Engine and Drivetrain
13
12-04-2013 06:26 PM
Moobesor
3rd Gen High Performance and Accessories (5.9L Only)
4
02-23-2008 09:57 AM