Mounting Fuel Pressure Isolator... where?
08-04-2004, 04:11 PM
#1
Registered User
Thread Starter
Join Date: Jun 2004
Location: Boise, ID
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Mounting Fuel Pressure Isolator... where?
I have the ISSPRO EV Fuel Pressure Gauge Kit from Piers that includes an isolator (I know many here prefer to run straight mechanical).
My question is, where on the firewall is a good place to mount the isolator? Seems the driver side of my truck is already quite busy with accessories so real estate is sparce. Would like to see some pics of where you guys are mounting the isolator up as the isolator design doesn't seem too "firewall friendly" to me.
My question is, where on the firewall is a good place to mount the isolator? Seems the driver side of my truck is already quite busy with accessories so real estate is sparce. Would like to see some pics of where you guys are mounting the isolator up as the isolator design doesn't seem too "firewall friendly" to me.
08-04-2004, 07:31 PM
#2
Registered User
Join Date: Jan 2003
Location: Ab. Canada
Posts: 318
Likes: 0
Received 0 Likes
on
0 Posts
I had the same kit, mounted the isolator up under the drip lip that seals the back of the hood, held with a couple of zip ties. It was nice and handy to get to when it quit working, which it did, twice, before I threw it away and plumbed it in solid.
Thread
Thread Starter
Forum
Replies
Last Post
CRXsi
3rd Gen High Performance and Accessories (5.9L Only)
11
04-03-2006 06:04 PM
deezulsmoke
3rd Gen High Performance and Accessories (5.9L Only)
1
02-08-2005 02:15 PM
gaRam
Performance and Accessories 2nd gen only
17
09-06-2004 08:39 PM
z1bigtom
24 Valve Engine and Drivetrain
24
06-15-2004 03:53 PM