I put a used Ez on my truck last month and was wanting to make sure that the jumper setting was on level 3. The instruction say to take off the allen heads on the front panel. Is the front panel the power inlet side? I took off the panel opposite the power inlet and there were 3 jumper settings but no jumper wire. Thanks

 

Joe, you are looking in the right place. The jumper is not a piece of wires, its a conductor that slips onto the jumper pins.<br><br>you should see 2 sets of pins and one set of pins with the jumper.<br><br><br>Have eric or snow cap help you

 

[quote author=Bob Wagner link=board=7;threadid=10821;start=0#103306 date=1044977513]<br>Joe, you are looking in the right place. The jumper is not a piece of wires, its a conductor that slips onto the jumper pins.<br><br>you should see 2 sets of pins and one set of pins with the jumper.<br><br><br>Have eric or snow cap help you <br>[/quote]<br><br>Snow Cap? Who's that?

 

No jumper there at all, Bob. Terry's sellin defective parts again <br>Does this mean that the box is operating @ default? <br>Seems to be working.

 

my last ez had no jumper on the pins. operates in default level, smoke level 3

 

[quote author=Bob Wagner link=board=7;threadid=10821;start=0#103306 date=1044977513]<br><br><br>Have eric or snow cap help you <br>[/quote]<br>Eric doesn't have one so he knows as much as me, and as for Snow Cap, he's passed out in the bathtub. <br> As Eric said, there isn't a jumper, just 3 sets of pins.

 

[quote author=NAIL BENDER link=board=7;threadid=10821;start=0#103445 date=1045006263]<br>[quote author=Bob Wagner link=board=7;threadid=10821;start=0#103306 date=1044977513]<br><br><br>Have eric or snow cap help you <br>[/quote]<br>as for Snow Cap, he's passed out in the bathtub. <br>[/quote]<br><br>Doh! That hurts man!

 

I just got rid of a bunch of jumper. shoot edge an email and they will take care of you<br><br><br>http://www.edgeproductsinc.com<br><br><br>Terry told me the box came direct from edge

 

Bob, does it matter if the jumper is there? Or, does it default to the #3 setting without the jumper? <br><br> Thanks Joe

 

[quote author=DEZLPWR link=board=7;threadid=10821;start=0#103468 date=1045008146]<br><br>Doh! That hurts man! <br>[/quote]<br><br>Steve, I wish I had those bathtub pics. Could have shown them a bunch of times. Didn't mean to hurt your feelings. :'(

 

EZ. Get the Comp. MUCH easier to adjust the fueling levels. ;D

 

Blue someone told me that your pump wire is hooked up to the firewall &amp; not the pump??<br> Danny

 

If ya havent found a jumper, I've got a few laying around that I can bring up. I believe its just your standard computer type jumper.