Just installed Vulcan relocat/big line
#1
Just installed Vulcan relocat/big line
Just got finished with the install and I will tell you from personal experience to read the directions. It says very plainly that you need 1/2 tank or less...mine was full and I took a diesel bath. Other than that, it was pretty straight forward and now I my press. increased to 15 at idle (from 13) and 11 at WOT (from 6). Needless to say, I'm happy now and not scared to pull my camper anymore. I would strongly recommend it to anyone fighting fuel pressure issues.
#2
DTR's Locomotive Superhero and the DTR Sweet Tea Specialist
Joined: Jul 2004
Posts: 2,883
Likes: 0
From: Valparaiso, IN
Did you just relocate the stock LP or did you end up using a different pump like a Holley or something similar? I'm going to be doing the same thing to my truck in the spring time. But I have an in-tank pump so I'm gonna go witha holley blue to replace the intank unit the dealer left me.
#3
Did you just relocate the stock LP or did you end up using a different pump like a Holley or something similar? I'm going to be doing the same thing to my truck in the spring time. But I have an in-tank pump so I'm gonna go witha holley blue to replace the intank unit the dealer left me.
Thread
Thread Starter
Forum
Replies
Last Post
tempoffroad
Performance and Accessories 2nd gen only
9
03-27-2006 07:50 PM
SilverRam01
Performance and Accessories 2nd gen only
7
07-27-2005 11:24 AM
SuperDave4x4
Performance and Accessories 2nd gen only
8
07-09-2005 03:49 PM