Performance and Accessories 2nd gen only Talk about Dodge/Cummins aftermarket products for second generation trucks here. Can include high-performance mods, or general accessories.

Istalled Juice/Tranny/clutch slips?

Thread Tools
 
Search this Thread
 
Old 04-10-2007, 09:44 PM
  #1  
Registered User
Thread Starter
 
Badger555's Avatar
 
Join Date: Apr 2007
Posts: 21
Likes: 0
Received 0 Likes on 0 Posts
Istalled Juice/Tranny/clutch slips?

Help, I have a 2001 HO/6speed 2500, In stock mode, nothing seems to slip. As soon as I switch to Race, in 5 and 6th, the rps rev up and as I let off the throttle, It seems to grip and go. Truck has 70k towing miles.

Could it be the clutch is slipping under added HP or are my back tires spinning as some friend suggested.

Thanks for your input.
Old 04-10-2007, 09:59 PM
  #2  
DTR question asker
 
dieselfuelonly's Avatar
 
Join Date: Dec 2006
Location: Chapel Hill, NC
Posts: 869
Likes: 0
Received 0 Likes on 0 Posts
I would think spinning the tires in 5th and 6th gear would be what you probably wanted to hear, but I doubt its that. From my experience with slipping clutches, sounds exactly like you're clutch is slipping to me.
Old 04-10-2007, 10:08 PM
  #3  
Registered User
 
denny G's Avatar
 
Join Date: Apr 2004
Location: N.E Ohio
Posts: 35
Likes: 0
Received 0 Likes on 0 Posts
I have a 01`HO 2500 also. With only a VanAken box,blows thru the clutch in 5&6 with only 50,000miles on it.
Stock clutches are weak...............
Old 04-10-2007, 11:51 PM
  #4  
Registered User
Thread Starter
 
Badger555's Avatar
 
Join Date: Apr 2007
Posts: 21
Likes: 0
Received 0 Likes on 0 Posts
Thanks for that, Guess I need to start to shop for a clutch. Wish the tires were spinning though . So what to buy, Clutch, through out bering etc? Machined,, and will I now tear out my rearend next? LOL
Old 04-10-2007, 11:55 PM
  #5  
Banned
 
Box5's Avatar
 
Join Date: Feb 2007
Location: Bellingham, Wa
Posts: 1,290
Likes: 0
Received 1 Like on 1 Post
just get a full clutch kit (pilot bearing, clutch disk, pressure plate, release bearing). through southbend or Valair would be good choices.
Old 04-10-2007, 11:59 PM
  #6  
Registered User
Thread Starter
 
Badger555's Avatar
 
Join Date: Apr 2007
Posts: 21
Likes: 0
Received 0 Likes on 0 Posts
Roger, Thanks for that!!!! I also tow a 12,000 lb boat, will it have to be heavy duty with the torque in tow mode, additional hydraulics etc?

Ordered clutch kit from
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
robby t
3rd Gen High Performance and Accessories (6.7L Only)
21
04-03-2012 12:12 PM
tyson686
3rd Gen Engine and Drivetrain -> 2003-2007
1
02-02-2010 07:43 AM
Bigdaddystroker
3rd Gen Engine and Drivetrain -> 2003-2007
9
08-08-2007 01:02 AM
12valve
Performance and Accessories 2nd gen only
2
04-27-2007 10:20 AM
tcb
3rd Generation Ram - Non Drivetrain - All Years
7
06-24-2003 08:25 PM



Quick Reply: Istalled Juice/Tranny/clutch slips?



All times are GMT -5. The time now is 04:32 PM.