Injectors for moderate power
#16
Registered User
Join Date: Feb 2006
Location: Reno,NV
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
The difference in HP between the Machs and Jammers IMO is very small. I have run different sets of both. What differences I can tell was that all the Jammer injectors made my truck idle with a lope.I pulled them out several times and changed out the injector tubes,O-rings,copper gaskets etc,but the loping did not go away.these were complete injectors,not just tips.When I switched to the Machs,my truck ran smooth as silk,idled perfect, with less smoke. The Jammers made good power but,I will pay more for the Machs.
#17
Registered User
Join Date: Aug 2005
Location: WA State
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
Here we go again! Check these out, if you are interested in performance and quality. www.dynomitediesel.com
#18
I went with the RV275s only because I wanted NO worries with EGTs. I have only once hit 1000 degrees - the rest of the time it stays around 8-900 degrees while towing. I read before that the Mach 1.6s do hover around 1200 degrees at times.....but, search and see what you like. Mine are fine as is and I am happy with my power levels now.
#20
Registered User
Join Date: Jun 2006
Location: Lake Charles,Louisiana
Posts: 1,367
Likes: 0
Received 0 Likes
on
0 Posts
yeah, but what number is your edge on?
those 275 arent causing all that heat, that edge is.
when i had 50hp injectors,i barely saw 1150 at WOT and i mean WOT!!!
fueling boxes will always cause that much more heat over just injectors.
Thread
Thread Starter
Forum
Replies
Last Post
6Stix
3rd Gen High Performance and Accessories (5.9L Only)
8
03-28-2008 03:33 PM
jmccart
3rd Gen High Performance and Accessories (5.9L Only)
15
01-09-2008 12:29 PM
GR40RCapri
12 Valve Engine and Drivetrain
18
11-14-2006 08:34 AM
hllbllyhellion
3rd Gen High Performance and Accessories (5.9L Only)
7
11-17-2005 06:52 PM