Jordan5687

Ok I haven't seen anyone make a quad pillar mount for our trucks for the gauges. Anyone have ideas on how to get 4 of them nicely on the pillar??? I want to try and have all 4 on the pillar and not 3 there and 1 somewhere else...if I can. Anyone have pics of their gauge mounts/setups or ideas about that?? I was thinking about getting 2 of those dual pods and setting them there but wasn't sure how that would look. I know I've seen those ones that hold 1-2 or 3 and you can move it along the stock pillar to the height you want, so maybe get a 3 and a 1?? or 2 duals?? Anyone have suggestions.....pictures would be great too! Thanks!!!

bullboy85

i remember a custom piller setup, someone posted a pic of i think on one of the threads i posted, it had 3 but could easly do 4 with the same idea, it used the single podes like youd mound on the dash

C2O

it was from the the great BigBlue. bondo and fiberglass was how he did it. took a regular 3 pod and just added one more on top looked great until someone recked it.

dieselman2300

How about something like this?
He is also a member on here.
http://lazarsmith.com/Gauges.html

STate

I bought a four guage pod from diesel manor that mounts between my rearview and overhead console, kinda of a PITA sometimes but really a nice place for the guages. Out of the way and easy to see. I chose not to go with A piller guages just so they werent in my field of vision. I would recomend this setup.

bucket truck

You can get double gauges from Westach.

drasko

i built one for my truck using the stock a-pillar and 2 generic dual guage pods from the autoparts store. its hard to get them lined up so you can see them all............ its tough but can be done..
ill get some pix up tomorrow
drasko

West Coast

Even though this is not a gauge pod I think this setup looks clean and would look great with 4 gauges. You could easily make the mounting plate your self.

DHunter

I thought I had link to one with four. I will keep looking. I got my 3 pod here

http://egauges.com/vdo_acce.asp?Subg..._Ram_1994_1997

Here is a nice steering column pod if you can't find a quad.

http://www.rpmoutlet.com/dodgec66.htm

The Pricol gauges I got have green lighting to match the
dash.

This is for 08 and up but Im not sure the differences and its not on the a-pillar

http://www.puredieselpower.com/catal...nt-p-1360.html

Jordan5687

Ok, now what about a dual steering column?? I've seen the single for my year model, but no duals?? I think I have run across it somewhere though?? Anyone know? Thanks for the help with this. I have a total of 5 gauges, so I was thinking maybe 3 on the pillar and 2 on the steering wheel column(if I can find one like that)

XLR8R

You can get up to 6 gauges on one mount (4 max for the A-Pillar:

http://lazarsmith.com/Gauges.html

I don't find they obstruct vision at all.

DHunter

They show a dual but I don't know why it is only available for later trucks? Maybe dremel timeand move your flasher button.
Have you though about a triple and add a single to the top. Might be real high up.
I found a four for a Ford but don't know how much modding would have to be done.http://propartsllc.com/prodDetail.php?ID=268

C2O

for a 2nd gen?

2broke2smoke

not sure if this will help ...

i've got 4 gauges in my old "rods pod" ON MY DASH

looks good and easy to view

someone posted on here that scotty was selling them ...

good luck

Need95-00CTD

How about Duct Tape?!?

Sorry, it had to be done...