SilverHoss99

I have heard about Haisleys Machine producing "smoker" injectors for a 24V cummins. I am trying to find some anyone got any ideas most places have switched from these to lightings which are low smoke injectors. I want to smoke like a train Im getting a FASS and gauges before anything. I was just curious. I was also wondering is it possible to turn a 24V into a non electronic controlled fuel system and give it something like the 12V or is this maybe just a horribly bad idea any thoughts comments anything would be appriciated.
thanks again hoss

TxDiesel007

Dont know much about 24V injectors.

But i do know that F1 Diesel has some mach somethings for you that will make your truck smoke like a train.. Might wanna try them as an alternative to haisely.... or another option to look into..

Tx

blackdiesel

they do change the injection pumps on the 24v to something similar to the 12v's. and if ya want smoke get the injectors you are talkin about and a drag comp and unplug the map sensor from the block. that makes it smoke like a train

WildBill

Your truck will make less power smoking like a train than if it's properly set up, black smoke is unburnt fuel, waste of money

DZLPWR

Most people talk about "smoker" injectors as in they put out a huge amount of fuel and you realy cant clear them up with twins pushing alot of boost. They are usually for pulling and not for street use.

Get yourself a box and decent injectors and your truck will smoke. Just make sure you watch your guages tho because adding alot of fuel to get alot of smoke makes your EGTS skyrocket and you risk meltdown. Goodluck -Jake

blackdiesel

This is with 130 horse injectors and a 120 comp with the map sensor unpluged.

smokindog

Did you try looking in the classifieds yet?

There is a set in there under the 2nd Gen Performance & Accessories category.......

Texas Pride

What is the map sensor and where is it at on the 24v?

blackdiesel

do you have a comp? if ya got a comp, its right behind the fuel filter. (well at least on my 02) just unplug it from the block. and fill your your sig so we know whatcha got

Tommy93w350

Does it hurt the motor or pump running the map sensor unplugged??

blackdiesel

i ran mine like that for 2 or 3 months. it throws a code, but dosnt set off the check engine light. as far as i can tell it didnt hurt mine any. i just unpluged it for pic puropses only. then i drove it like that once. and again. then i just didtn plug it back in because the smoke was so thick and black and awesome.

What its acually doing is dumping the fuel in earlier rather than when you build boost. This being said, it makes sense that it will increase your bottem end power. I, however, did not see an improvement. but every truck is different.

rebal

you want smoke????? get a MAD ECM it will make tons of smoke if you want it too but you can control it too!

jhood12

I have a stock 02 24V with nothing but a straight pipe and one of my buddies told me to unplug my map sensor and it will smoke like a train...So I did and no smoke and it was like I unplugged my turbo...

blackdiesel

you HAVE TO HAVE A COMP! just unpluging the stock map sensor isnt going to dump fuel into the engine.

RowJ

We all enjoy lots of smoke...at times. Please just give some thought to having it be selectable, so you don't give the feds and the environmentalists any reasons to clamp down on the rest of us....any more than they have already.

Thanks for reading

RJ