Performance and Accessories 2nd gen only Talk about Dodge/Cummins aftermarket products for second generation trucks here. Can include high-performance mods, or general accessories.

I am SOOO EXCITED

Thread Tools
 
Search this Thread
 
Old 09-09-2004 | 10:42 AM
  #1  
chief3510's Avatar
Thread Starter
Registered User
 
Joined: Apr 2003
Posts: 59
Likes: 0
From: Pennsylvania
Talking I am SOOO EXCITED

UPS just showed up with my new MBRP 4 inch exhast system for my truck. WOW those pipes are huge. Can hardly wait for Saturday to put it on. Hope the install goes easy. Don't wanna be layin in the driveway all day.
Old 09-09-2004 | 08:30 PM
  #2  
psalm69's Avatar
Registered User
 
Joined: May 2002
Posts: 105
Likes: 0
From: Albuquerque NM
Take some pics! Scott
Old 09-09-2004 | 08:41 PM
  #3  
jj3500's Avatar
Registered User
 
Joined: Jul 2004
Posts: 668
Likes: 0
From: NEW YORK
you have a sazall with alot of blades?
Old 09-09-2004 | 08:54 PM
  #4  
4doogie's Avatar
Registered User
 
Joined: Dec 2003
Posts: 402
Likes: 0
From: north cali
Man why wait do it tonight Good luck talk pics.

Chris
Old 09-10-2004 | 07:35 AM
  #5  
chief3510's Avatar
Thread Starter
Registered User
 
Joined: Apr 2003
Posts: 59
Likes: 0
From: Pennsylvania
I will try to take some pictures. Have the sawzall all ready to go. The tailpipe is already off. So that is one less piece to remove.
Old 09-11-2004 | 08:58 PM
  #6  
chief3510's Avatar
Thread Starter
Registered User
 
Joined: Apr 2003
Posts: 59
Likes: 0
From: Pennsylvania
Well guys I got the exhaust system on today. Took about 3 hours. Did not get a chance to snap any pictures. If I get some time I will take some of the finished product. It really wasn't that bad of a job. If I had a lift and a buddy to help it would have taken maybe an hour. I started out by doing a mufflerectomy on the old system (thank god for the sawzall). One cut in the middle just before the resonator and couple of quick cuts on the brackets and the back half was off. Next I took off the bolts from the turbo outlet (thank god for a buddies 24 inch ratchet extension) and the other half was off. The install went pretty quick all except for the downpipe. This thing was a bear. Dodge did not think about adding an aftermarket 4 inch downpipe when they designed the truck . Finally got everything in place and measured twice and cut once for the middle section. Fit like a glove . Put the stainless tip on and fired her up. It was actually quieter than the staock system ***. But then I took her out for a ride and I took off and opened her up. I now heard the deep throaty growl that everyone talks about . My fuel mileage will now drop through the floor cause I wanna open her up to hear that puppy growl . Oh well maybe next year the wife will let me get an EDGE EZ.
Old 09-12-2004 | 03:22 AM
  #7  
BigBlue's Avatar
Banned
 
Joined: Feb 2002
Posts: 0
Likes: 0
I've had my 4" straight pipe on for 3 years now. I still like to open her up just to hear that straight pipe roar. It's addicting. Congrats on the exhaust. Now let the BOMBing begin.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Bogurt
1st Gen. Ram - All Topics
12
03-01-2009 05:12 PM
slimerept
3rd Gen High Performance and Accessories (5.9L Only)
16
11-23-2008 04:53 PM
newconcorddodge
Other
6
10-06-2008 10:05 PM
torkmnstr
3rd Gen Engine and Drivetrain -> 2003-2007
6
02-13-2008 02:52 PM
Buckshotmckee
Other
22
05-01-2007 08:18 PM




All times are GMT -5. The time now is 04:26 PM.