HTT hx40/35?
10-26-2005, 10:34 PM
#1
Registered User
Thread Starter
Join Date: Jan 2005
Location: Yuba city Kalifornia
Posts: 3,899
Likes: 0
Received 3 Likes
on
2 Posts
HTT hx40/35?
I installed a set of mach 1.6s in my 01 HO and see my egts head north fast so i think a new turbo is in need .
im looking at an HTT 60mm w14cm is this a good set up?
im looking at an HTT 60mm w14cm is this a good set up?
10-27-2005, 10:34 AM
#2
Registered User
Join Date: Aug 2005
Location: Minnesota area/Fargo
Posts: 204
Likes: 0
Received 0 Likes
on
0 Posts
I will be getting my 60mm compressor wheel and assembly from HTT in about a week, I already have a 14cm waste gated housing.
Sorry I know this doesn't help ya much, but in about two weeks I should know the difference.
Sorry I know this doesn't help ya much, but in about two weeks I should know the difference.
10-27-2005, 11:59 AM
#3
Registered User
Join Date: Jan 2002
Location: Naugatuck, CT
Posts: 445
Likes: 0
Received 0 Likes
on
0 Posts
Yes, it's a good upgrade. I've been running mine for a couple of years with EGT's in control until my last upgrade (4GSK kit). It's still slow to rise but will go above 1350 if I hold it. Spool up is very quick on a 12cm housing and I have been running 45 psi with no problems at all. Best of all, it sure would make a nice top turbo in a twin kit... 
Thread
Thread Starter
Forum
Replies
Last Post
O.T
3rd Gen High Performance and Accessories (5.9L Only)
16
01-14-2008 02:47 PM
Bobcat698
Performance and Accessories 2nd gen only
7
11-08-2006 11:20 AM
Hawkeye
Performance and Accessories 2nd gen only
11
09-23-2003 08:22 PM