HTT 62/14 with HT3B twins???
#1
Registered User
Thread Starter
Join Date: Dec 2006
Location: Southern Utah
Posts: 281
Likes: 0
Received 0 Likes
on
0 Posts
HTT 62/14 with HT3B twins???
I've been told that the HT3B is too small to run with my HTT 62/14. I've read on here that it's a popular combo. Some one suggested a S400, would that be better for what I want?
My goals:
-500HP (so not to nuke my NV4500 12.5 clutch)
-Drive daily and some longer trips
-Have enough power to beatup a Powerjoke or Duramax.
-be reliable
Am I asking for to much here? What do you guys think?
Thanks again
DH
My goals:
-500HP (so not to nuke my NV4500 12.5 clutch)
-Drive daily and some longer trips
-Have enough power to beatup a Powerjoke or Duramax.
-be reliable
Am I asking for to much here? What do you guys think?
Thanks again
DH
#2
Registered User
Join Date: Apr 2005
Location: DIXON, CA.
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
It will work very well!! 500 should be fairly easy with that combo and also run fairly clean, I'd suggest a smaller ex. housing for the 3b to aid in spool-up! At 500 horse this combo will not be working hard at all
#3
Registered User
Thread Starter
Join Date: Dec 2006
Location: Southern Utah
Posts: 281
Likes: 0
Received 0 Likes
on
0 Posts
The 3B I have right now has a 20cm exhuast housing (split design) - I planned on switching it to a 27 (split design). Maybe I won't. Are you running twins?
#4
Registered User
Join Date: Apr 2005
Location: DIXON, CA.
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
With that small housing you will want to watch that 3b depending on the fueling you could over-speed it without a gate on it, but spool-up should be very very fast! I have a couple 26 housings and a 23 if you decide you want a bigger one let me know. Jeff
Trending Topics
#10
Registered User
#14
Registered User
Join Date: Jun 2006
Location: Lake Charles,Louisiana
Posts: 1,367
Likes: 0
Received 0 Likes
on
0 Posts
its www.citydiesel.net .